Audio Working Group - Activity in 2015
No matches.
TR publications
-
1 document published.
-
Web Audio API published as a Working Draft. History of Web Audio API
-
GitHub
WebAudio/web-audio-api
-
12 issues opened.
-
Editorial: could consider upgrading MathJax to 2.6? WebAudio/web-audio-api#688, by @kojiishi.
-
decodeAudioData: "If audioData is null or not a valid ArrayBuffer:" is dead code WebAudio/web-audio-api#686, by @Ms2ger.
-
Inconsistency on cone inner and outer angles for PannerNode WebAudio/web-audio-api#682, by @rtoy.
-
Incorrect comment for StereoPannerNode WebAudio/web-audio-api#681, by @pendragon-andyh.
-
decodeAudioData() results are different on different OS WebAudio/web-audio-api#678, by @wyudong.
-
Add min/max read-only attributes for parameters in each node WebAudio/web-audio-api#673, by @rtoy.
-
Add automation using a power law WebAudio/web-audio-api#2415, by @delucis.
-
Clarify what "stability" means in playbackCategory description WebAudio/web-audio-api#670, by @rtoy.
-
'interactive' should be "interactive" WebAudio/web-audio-api#668, by @foolip.
-
The ConvolverHandler.prototype.buffer setter doesn't handle null WebAudio/web-audio-api#667, by @foolip.
-
The AudioBufferSourceNode.prototype.buffer setter doesn't handle null correctly WebAudio/web-audio-api#666, by @foolip.
-
-
12 issues closed.
-
Ordering of onstatechange and oncomplete for OfflineAudioContext WebAudio/web-audio-api#444.
-
decodeAudioData() results are different on different OS WebAudio/web-audio-api#678.
-
Behavior of exponentialRampToValue when the previous event is less than equal to 0 WebAudio/web-audio-api#612.
-
Clarify what "stability" means in playbackCategory description WebAudio/web-audio-api#670.
-
Can OfflineAudioContext be used more than once? WebAudio/web-audio-api#346.
-
Chaining AudioNode.connect() and AudioParam's automation methods WebAudio/web-audio-api#650.
-
'interactive' should be "interactive" WebAudio/web-audio-api#668.
-
OfflineAudioContext and AudioContext decoding should complete before garbage collection WebAudio/web-audio-api#443.
-
createIIRFilter should take doubles WebAudio/web-audio-api#631.
-
PannerNode - add information on why the panner is hard coded to 2 channel only WebAudio/web-audio-api#52.
-
AnalyserNode design issues WebAudio/web-audio-api#86.
-
Use consistent language and approach to document algorithms WebAudio/web-audio-api#260.
-
-
19 issues received 46 new comments.
-
Need a way to determine AudioContext time of currently audible signal WebAudio/web-audio-api#12 (11 comments by @ingararntzen, @jipodine, @joeberkovitz, @pozdnyakov, @srikumarks)
-
Chaining AudioNode.connect() and AudioParam's automation methods WebAudio/web-audio-api#650 (8 comments by @cwilso, @hoch, @rtoy)
-
The AudioBufferSourceNode.prototype.buffer setter doesn't handle null correctly WebAudio/web-audio-api#666 (4 comments by @foolip, @padenot)
-
decodeAudioData() results are different on different OS WebAudio/web-audio-api#678 (2 comments by @padenot, @rtoy)
-
Inconsistency on cone inner and outer angles for PannerNode WebAudio/web-audio-api#682 (2 comments by @karlt, @rtoy)
-
Clarify what "stability" means in playbackCategory description WebAudio/web-audio-api#670 (2 comments by @billhofmann, @rtoy)
-
The ConvolverHandler.prototype.buffer setter doesn't handle null WebAudio/web-audio-api#667 (2 comments by @foolip, @rtoy)
-
-
12 pull requests opened.
-
Don't fail if spec-generator doesn't include MathJax WebAudio/web-audio-api#685, by @plehegar.
-
Directly pipe curl to tar WebAudio/web-audio-api#684, by @rtoy.
-
Specify omni-directional source for PannerNode WebAudio/web-audio-api#683, by @rtoy.
-
Fix #444 documentation on ordering of onstatechange and oncomplete WebAudio/web-audio-api#680, by @billhofmann.
-
Fix respec warnings. WebAudio/web-audio-api#679, by @rtoy.
-
Fix #12 by adding attributes for performance timestamps and output la… WebAudio/web-audio-api#677, by @pozdnyakov.
-
Fix #670: Fix after tidy merge WebAudio/web-audio-api#676, by @billhofmann.
-
Fix up complaints from tidy. WebAudio/web-audio-api#675, by @rtoy.
-
FIx #670 - Wording change WebAudio/web-audio-api#674, by @billhofmann.
-
Load MathJax from w3.org/scripts instead of CDN WebAudio/web-audio-api#672, by @tripu.
-
Use double quotes for IDL strings WebAudio/web-audio-api#669, by @rtoy.
-
Specify behavior of events following SetTarget events. WebAudio/web-audio-api#665, by @rtoy.
-
-
14 pull requests merged.
-
Directly pipe curl to tar WebAudio/web-audio-api#684.
-
Fix #444 documentation on ordering of onstatechange and oncomplete WebAudio/web-audio-api#680.
-
Fix respec warnings. WebAudio/web-audio-api#679.
-
Specify exponential ramp behavior when previous value is 0 WebAudio/web-audio-api#624.
-
Fix #670: Fix after tidy merge WebAudio/web-audio-api#676.
-
Fix up complaints from tidy. WebAudio/web-audio-api#675.
-
Load MathJax from w3.org/scripts instead of CDN WebAudio/web-audio-api#672.
-
Use double quotes for IDL strings WebAudio/web-audio-api#669.
-
Fix #443: clarify garbage collection lifecycle for decodeAudioData WebAudio/web-audio-api#649.
-
Fix #348 add AudioContext constructor dictionary with buffer hint WebAudio/web-audio-api#651.
-
createIIRFilter takes double coefficients WebAudio/web-audio-api#632.
-
Fix #52 by addressing PannerNode and StereoPannerNode limitations explicitly in spec WebAudio/web-audio-api#634.
-
Fix #86 by clarifying channel down-mixing. WebAudio/web-audio-api#629.
-
Fix #260 by using JavaScript for all examples. WebAudio/web-audio-api#637.
-
-
1 pull request closed.
-
FIx #670 - Wording change WebAudio/web-audio-api#674.
-
-
16 pull requests received 81 new comments.
-
Spec the processing model for the Web Audio API WebAudio/web-audio-api#644 (33 comments by @billhofmann, @cwilso, @joeberkovitz, @skratchdot)
-
Fix #12 by adding attributes for performance timestamps and output la… WebAudio/web-audio-api#677 (14 comments by @jipodine, @pozdnyakov, @rtoy)
-
Fix #260 by using JavaScript for all examples. WebAudio/web-audio-api#637 (6 comments by @joeberkovitz, @rtoy)
-
Fix #444 documentation on ordering of onstatechange and oncomplete WebAudio/web-audio-api#680 (4 comments by @billhofmann, @rtoy)
-
Fix #348 add AudioContext constructor dictionary with buffer hint WebAudio/web-audio-api#651 (4 comments by @billhofmann)
-
Fix #86 by clarifying channel down-mixing. WebAudio/web-audio-api#629 (3 comments by @joeberkovitz, @rtoy)
-
Add a list of nodes and reason why they can add latency, in an inform… WebAudio/web-audio-api#627 (2 comments by @billhofmann)
-
Fix #447: Define oscillator carefully. WebAudio/web-audio-api#552 (2 comments by @joeberkovitz, @rtoy)
-
Make the AudioDestinationNode have an output WebAudio/web-audio-api#397 (2 comments by @cwilso, @joeberkovitz)
-
Don't fail if spec-generator doesn't include MathJax WebAudio/web-audio-api#685 (1 comment by @plehegar)
-
Fix #250 (Desugaring) by using constructors instead of context factory methods WebAudio/web-audio-api#662 (1 comment by @joeberkovitz)
-
Fix #443: clarify garbage collection lifecycle for decodeAudioData WebAudio/web-audio-api#649 (1 comment by @billhofmann)
-
Spec nominal ranges, nyquist, and behavior when outside the range. WebAudio/web-audio-api#620 (1 comment by @joeberkovitz)
-
WebAudio/web-midi-api
-
1 issue closed.
-
Proposal for MIDIInterface object in addition to MIDIAccess and MIDIPort. WebAudio/web-midi-api#156.
-
-
1 issue received 2 new comments.
-
Proposal for MIDIInterface object in addition to MIDIAccess and MIDIPort. WebAudio/web-midi-api#156 (2 comments by @cwilso, @objectkit)
-
GitHub
WebAudio/web-audio-api
-
1 issue opened.
-
Incorrect formula for setValueCurveAtTime WebAudio/web-audio-api#657, by @rtoy.
-
-
7 issues closed.
-
Need description of latency expectation in AudioProcessEvent WebAudio/web-audio-api#85.
-
Remove unsupported methods from offlineAudioContext WebAudio/web-audio-api#308.
-
Sample format: what do +/-Infinity and NaN mean? WebAudio/web-audio-api#110.
-
(LinearConvolution): Linear convolution effect is defined by Wikipedia WebAudio/web-audio-api#125.
-
decodeAudioData Prose: avoid video containers that have an audio track WebAudio/web-audio-api#34.
-
Clarify computedPlaybackRate with other attributes WebAudio/web-audio-api#560.
-
Incorrect formula for setValueCurveAtTime WebAudio/web-audio-api#657.
-
-
12 issues received 41 new comments.
-
Need a way to determine AudioContext time of currently audible signal WebAudio/web-audio-api#12 (13 comments by @ingararntzen, @jipodine, @joeberkovitz)
-
Chaining AudioNode.connect() and AudioParam's automation methods WebAudio/web-audio-api#650 (7 comments by @hoch, @joeberkovitz, @rtoy)
-
Unclear behavior of setTargetAtTime when there is an event following setTargetAtTime WebAudio/web-audio-api#652 (5 comments by @karlt, @rtoy)
-
TAG issue: Subclassing / Node composition WebAudio/web-audio-api#251 (4 comments by @cwilso, @joeberkovitz)
-
Storing AudioBuffers in native sample bit depth (was: Add support for 16-bit sample type?) WebAudio/web-audio-api#2396 (3 comments by @joeberkovitz, @juj)
-
TAG issue: Constructibility & De-sugaring of static methods WebAudio/web-audio-api#250 (2 comments by @joeberkovitz)
-
Allow arraybuffers to be made immutable and shared between main and audioworkernode threads WebAudio/web-audio-api#474 (1 comment by @taisel)
-
Need description of latency expectation in AudioProcessEvent WebAudio/web-audio-api#85 (1 comment by @joeberkovitz)
-
Behavior of exponentialRampToValue when the previous event is less than equal to 0 WebAudio/web-audio-api#612 (1 comment by @joeberkovitz)
-
-
11 pull requests opened.
-
Changed href for Parameter Automation methods to conform to the new f… WebAudio/web-audio-api#664, by @notthetup.
-
Fix bad link to StereoPanner WebAudio/web-audio-api#663, by @rtoy.
-
Fix #250 (Desugaring) by using constructors instead of context factory methods WebAudio/web-audio-api#662, by @joeberkovitz.
-
Fix #308 (continued) by having Offline inherit from BaseAudioContext WebAudio/web-audio-api#661, by @joeberkovitz.
-
Support chaining on AudioNode.connect() and AudioParam automation methods WebAudio/web-audio-api#660, by @hoch.
-
Specify initial event for linear and exponential ramp. WebAudio/web-audio-api#659, by @rtoy.
-
Use correct formula for setValueCurveAtTime WebAudio/web-audio-api#658, by @rtoy.
-
OfflineAudioContext suspend/resume behavior WebAudio/web-audio-api#656, by @hoch.
-
Use system cmake WebAudio/web-audio-api#655, by @padenot.
-
642 conflict on resuming context WebAudio/web-audio-api#654, by @hoch.
-
Offline context suspend/resume behavior WebAudio/web-audio-api#653, by @hoch.
-
-
11 pull requests merged.
-
Changed href for Parameter Automation methods to conform to the new f… WebAudio/web-audio-api#664.
-
Support chaining on AudioNode.connect() and AudioParam automation methods WebAudio/web-audio-api#660.
-
Fix bad link to StereoPanner WebAudio/web-audio-api#663.
-
Fix #85 by clarifying AudioContext.currentTime and various events' pl… WebAudio/web-audio-api#625.
-
Fix #308 (continued) by having Offline inherit from BaseAudioContext WebAudio/web-audio-api#661.
-
Fix #308 by refactoring most of AudioContext into BaseAudioContext. WebAudio/web-audio-api#638.
-
Fix #110 by adding explicit section on Audio Signal Values. WebAudio/web-audio-api#635.
-
Fix #125: remove redundant convolution doc. WebAudio/web-audio-api#636.
-
Fix #34 by adding ref to video element, on new tidied branch WebAudio/web-audio-api#643.
-
Fix #560 clarify loop behavior and time units, also playback start of… WebAudio/web-audio-api#648.
-
Use correct formula for setValueCurveAtTime WebAudio/web-audio-api#658.
-
-
3 pull requests closed.
-
642 conflict on resuming context WebAudio/web-audio-api#654.
-
Use system cmake WebAudio/web-audio-api#655.
-
Offline context suspend/resume behavior WebAudio/web-audio-api#653.
-
-
16 pull requests received 50 new comments.
-
Fix #85 by clarifying AudioContext.currentTime and various events' pl… WebAudio/web-audio-api#625 (10 comments by @joeberkovitz, @karlt, @rtoy)
-
Fix #250 (Desugaring) by using constructors instead of context factory methods WebAudio/web-audio-api#662 (7 comments by @domenic, @hoch, @joeberkovitz, @rtoy)
-
Spec nominal ranges, nyquist, and behavior when outside the range. WebAudio/web-audio-api#620 (5 comments by @joeberkovitz, @rtoy)
-
Fix #308 by refactoring most of AudioContext into BaseAudioContext. WebAudio/web-audio-api#638 (4 comments by @joeberkovitz, @rtoy)
-
Support chaining on AudioNode.connect() and AudioParam automation methods WebAudio/web-audio-api#660 (4 comments by @hoch, @rtoy)
-
Changed href for Parameter Automation methods to conform to the new f… WebAudio/web-audio-api#664 (3 comments by @hoch, @notthetup, @rtoy)
-
Fix #348 add AudioContext constructor dictionary with buffer hint WebAudio/web-audio-api#651 (3 comments by @billhofmann, @joeberkovitz)
-
Spec the processing model for the Web Audio API WebAudio/web-audio-api#644 (2 comments by @joeberkovitz, @padenot)
-
Fix #443: clarify garbage collection lifecycle for decodeAudioData WebAudio/web-audio-api#649 (2 comments by @billhofmann, @padenot)
-
Fix #560 clarify loop behavior and time units, also playback start of… WebAudio/web-audio-api#648 (2 comments by @joeberkovitz)
-
OfflineAudioContext suspend/resume behavior WebAudio/web-audio-api#656 (2 comments by @hoch, @padenot)
-
Fix #110 by adding explicit section on Audio Signal Values. WebAudio/web-audio-api#635 (1 comment by @joeberkovitz)
-
Fix #34 by adding ref to video element, on new tidied branch WebAudio/web-audio-api#643 (1 comment by @billhofmann)
-
WebAudio/web-midi-api
-
1 issue opened.
-
Proposal for MIDIInterface object in addition to MIDIAccess and MIDIPort. WebAudio/web-midi-api#156, by @objectkit.
-
-
2 issues received 3 new comments.
-
Proposal for MIDIInterface object in addition to MIDIAccess and MIDIPort. WebAudio/web-midi-api#156 (2 comments by @agoode, @objectkit)
-
GitHub
WebAudio/web-audio-api
-
14 issues opened.
-
Unclear behavior of setTargetAtTime when there is an event following setTargetAtTime WebAudio/web-audio-api#652, by @rtoy.
-
Chaining AudioNode.connect() and AudioParam's automation methods WebAudio/web-audio-api#650, by @hoch.
-
Conflict on resuming context WebAudio/web-audio-api#642, by @hoch.
-
Version of tidy should be fixed WebAudio/web-audio-api#641, by @rtoy.
-
Specify the nominal range for SpatialPannerNode's AudioParam WebAudio/web-audio-api#640, by @padenot.
-
createIIRFilter should take doubles WebAudio/web-audio-api#631, by @rtoy.
-
Specify the processing model for the Web Audio API WebAudio/web-audio-api#628, by @padenot.
-
Enable travis-ci to ensure that `tidy` errors don't creep in WebAudio/web-audio-api#623, by @padenot.
-
Warnings and errors when running tidy WebAudio/web-audio-api#619, by @rtoy.
-
setTargetAtTime should clarify legal range of values for timeConstant WebAudio/web-audio-api#616, by @joeberkovitz.
-
Is OscillatorNode not giving the full range when I apply it to AudioBufferSourceNode.detune? WebAudio/web-audio-api#614, by @inod.
-
Behavior of exponentialRampToValue when the previous event is less than equal to 0 WebAudio/web-audio-api#612, by @rtoy.
-
Distance models: maxDistance vs refDistance WebAudio/web-audio-api#611, by @rtoy.
-
Valid rolloff factors for Panner? WebAudio/web-audio-api#606, by @rtoy.
-
-
40 issues closed.
-
(LinearEffectsUsingConvolution): Linear Effects using Convolution ought to be merged into other sections WebAudio/web-audio-api#97.
-
Clearly state that AudioContext.currentTime is time of next-processed block WebAudio/web-audio-api#381.
-
Impedance mismatch between the Web Worker text and what is possible/needed for the AudioWorker WebAudio/web-audio-api#532.
-
Return destination from AudioNode::connect() WebAudio/web-audio-api#258.
-
Clamping loop points and offset for AudioBufferSourceNode WebAudio/web-audio-api#363.
-
(AudioBufferSourceNodeResampling): AudioBufferSourceNode resampling WebAudio/web-audio-api#118.
-
Rework PannerNode WebAudio/web-audio-api#372.
-
OfflineAudioContext progressive rendering WebAudio/web-audio-api#302.
-
Handling attributes set to null WebAudio/web-audio-api#436.
-
Review spec wide behavior on setting enum to invalid values. WebAudio/web-audio-api#383.
-
OfflineAudioContext should not fire "complete" directly WebAudio/web-audio-api#448.
-
Version of tidy should be fixed WebAudio/web-audio-api#641.
-
Specify the data model for AudioContext.createPeriodicWave WebAudio/web-audio-api#68.
-
Specify the data model for AudioParam.setValueCurveAtTime WebAudio/web-audio-api#67.
-
OscillatorNode's frequency attributes nominal range should be specced WebAudio/web-audio-api#273.
-
ConvolverNode: disallow state modification, describe algorithm, clarify language WebAudio/web-audio-api#122.
-
Enable travis-ci to ensure that `tidy` errors don't creep in WebAudio/web-audio-api#623.
-
"the Nyquist frequency" used before defining, used in several places WebAudio/web-audio-api#587.
-
currentTime in AudioContext is not progressing while suspended anymore WebAudio/web-audio-api#460.
-
AudioBufferSourceNode.buffer should only be set once WebAudio/web-audio-api#288.
-
Warnings and errors when running tidy WebAudio/web-audio-api#619.
-
How to debug audio node connections? WebAudio/web-audio-api#575.
-
Specify the coefficients used in the oscillator for the basic waveforms WebAudio/web-audio-api#569.
-
(DelayNodeSmoothing): DelayNode smoothing WebAudio/web-audio-api#79.
-
Specify the data model for WaveShaperNode.curve WebAudio/web-audio-api#65.
-
BiquadFilterNode.getFrequencyResponse is under-specified WebAudio/web-audio-api#60.
-
getByteTimeDomainData and getByteFrequencyData are underspecified WebAudio/web-audio-api#571.
-
Bad description for setValueAtTime followed by linear or exponential ramp WebAudio/web-audio-api#572.
-
setTargetAtTime should clarify legal range of values for timeConstant WebAudio/web-audio-api#616.
-
Introduction: link "use cases" to the stable Use Cases document WebAudio/web-audio-api#32.
-
Inconsistent description of audio node .value WebAudio/web-audio-api#582.
-
Is OscillatorNode not giving the full range when I apply it to AudioBufferSourceNode.detune? WebAudio/web-audio-api#614.
-
Panner distance model with distance < refDistance WebAudio/web-audio-api#326.
-
Clarify constraint for positive value for exponentialRampToValue WebAudio/web-audio-api#486.
-
Define the behaviour when disconnect called on node output wired to an AudioParam WebAudio/web-audio-api#43.
-
AudioBufferSourceNode.playbackRate should be specified as k-rate and not a-rate WebAudio/web-audio-api#55.
-
Add detail of connecting audio node to non audio node WebAudio/web-audio-api#40.
-
OfflineAudioContext doesn't specify valid sample rates WebAudio/web-audio-api#314.
-
Specify what should happen when the input channel count changes for delay nodes WebAudio/web-audio-api#25.
-
-
59 issues received 171 new comments.
-
Need a way to determine AudioContext time of currently audible signal WebAudio/web-audio-api#12 (16 comments by @jipodine, @joeberkovitz, @padenot, @pozdnyakov, @srikumarks)
-
The order in which Promises are returned, rejected, or resolved is ambiguous. WebAudio/web-audio-api#535 (14 comments by @jernoble, @joeberkovitz, @padenot, @rtoy)
-
cancelScheduledValues should set the current value as a parameter change WebAudio/web-audio-api#344 (12 comments by @cwilso, @joeberkovitz, @mark-buer, @mrkishi, @rtoy)
-
Interaction of automation methods is unclear WebAudio/web-audio-api#573 (8 comments by @joeberkovitz, @karlt, @mrkishi, @padenot, @rtoy)
-
Need to provide hints to increase buffering for power consumption reasons WebAudio/web-audio-api#348 (7 comments by @billhofmann, @hoch, @joeberkovitz, @rtoy)
-
Conflict on resuming context WebAudio/web-audio-api#642 (7 comments by @hoch, @joeberkovitz, @padenot, @rtoy)
-
Chaining AudioNode.connect() and AudioParam's automation methods WebAudio/web-audio-api#650 (6 comments by @hoch, @mrkishi, @padenot)
-
Enable travis-ci to ensure that `tidy` errors don't creep in WebAudio/web-audio-api#623 (6 comments by @hoch, @mdjp, @padenot, @rtoy)
-
Behavior of exponentialRampToValue when the previous event is less than equal to 0 WebAudio/web-audio-api#612 (5 comments by @joeberkovitz, @padenot, @rtoy)
-
AudioParam scheduling: no initial point and interleaved events? WebAudio/web-audio-api#130 (4 comments by @hoch, @rtoy)
-
Distance models: maxDistance vs refDistance WebAudio/web-audio-api#611 (3 comments by @joeberkovitz, @karlt, @rtoy)
-
setTargetAtTime should clarify legal range of values for timeConstant WebAudio/web-audio-api#616 (3 comments by @karlt, @rtoy)
-
Is OscillatorNode not giving the full range when I apply it to AudioBufferSourceNode.detune? WebAudio/web-audio-api#614 (3 comments by @inod, @karlt, @padenot)
-
Clarify constraint for positive value for exponentialRampToValue WebAudio/web-audio-api#486 (3 comments by @joeberkovitz, @mdjp, @rtoy)
-
Storing AudioBuffers in native sample bit depth (was: Add support for 16-bit sample type?) WebAudio/web-audio-api#2396 (2 comments by @juj, @padenot)
-
Specify the processing model for the Web Audio API WebAudio/web-audio-api#628 (2 comments by @joeberkovitz, @padenot)
-
(AudioBufferSourceNodeResampling): AudioBufferSourceNode resampling WebAudio/web-audio-api#118 (2 comments by @joeberkovitz)
-
TAG issue: Constructibility & De-sugaring of static methods WebAudio/web-audio-api#250 (2 comments by @joeberkovitz)
-
TAG Issue: Explaining ("De-sugaring") the `*Node` Types WebAudio/web-audio-api#255 (2 comments by @joeberkovitz)
-
TAG issue: Subclassing / Node composition WebAudio/web-audio-api#251 (2 comments by @cwilso, @joeberkovitz)
-
Review spec wide behavior on setting enum to invalid values. WebAudio/web-audio-api#383 (2 comments by @billhofmann, @padenot)
-
Conformance section: need to note use of MUST that is "RFC-legal" as opposed to common English usage WebAudio/web-audio-api#31 (2 comments by @billhofmann, @rtoy)
-
Remove unsupported methods from offlineAudioContext WebAudio/web-audio-api#308 (2 comments by @heycam, @padenot)
-
Filter node pops when frequency parameter is modulated below 0 WebAudio/web-audio-api#247 (2 comments by @joeberkovitz, @padenot)
-
"the Nyquist frequency" used before defining, used in several places WebAudio/web-audio-api#587 (2 comments by @mdjp, @padenot)
-
Define built-in oscillator output more carefully WebAudio/web-audio-api#447 (2 comments by @karlt, @rtoy)
-
BiquadFilterNode.getFrequencyResponse is under-specified WebAudio/web-audio-api#60 (2 comments by @joeberkovitz, @padenot)
-
(LinearEffectsUsingConvolution): Linear Effects using Convolution ought to be merged into other sections WebAudio/web-audio-api#97 (1 comment by @joeberkovitz)
-
Specify the nominal range for SpatialPannerNode's AudioParam WebAudio/web-audio-api#640 (1 comment by @joeberkovitz)
-
Describe the algorithm that DynamicsCompressorNode should use WebAudio/web-audio-api#10 (1 comment by @cwilso)
-
A NoiseGate/Expander node would be a good addition to the API. WebAudio/web-audio-api#2395 (1 comment by @joeberkovitz)
-
Impedance mismatch between the Web Worker text and what is possible/needed for the AudioWorker WebAudio/web-audio-api#532 (1 comment by @joeberkovitz)
-
OfflineAudioContext and AudioContext decoding should complete before garbage collection WebAudio/web-audio-api#443 (1 comment by @billhofmann)
-
Record all documentation that is considered developer documentation WebAudio/web-audio-api#45 (1 comment by @mdjp)
-
OfflineAudioContext should not fire "complete" directly WebAudio/web-audio-api#448 (1 comment by @joeberkovitz)
-
OscillatorNode's frequency attributes nominal range should be specced WebAudio/web-audio-api#273 (1 comment by @joeberkovitz)
-
ConvolverNode: disallow state modification, describe algorithm, clarify language WebAudio/web-audio-api#122 (1 comment by @joeberkovitz)
-
currentTime in AudioContext is not progressing while suspended anymore WebAudio/web-audio-api#460 (1 comment by @mdjp)
-
decodeAudioData Prose: avoid video containers that have an audio track WebAudio/web-audio-api#34 (1 comment by @billhofmann)
-
Dynamic Lifetime section should include explicit lifetime of AudioWorker WebAudio/web-audio-api#475 (1 comment by @padenot)
-
Bad description for setValueAtTime followed by linear or exponential ramp WebAudio/web-audio-api#572 (1 comment by @rtoy)
-
Introduction: link "use cases" to the stable Use Cases document WebAudio/web-audio-api#32 (1 comment by @billhofmann)
-
start(), stop() and AudioParam methods should throw for NaN and Infinity WebAudio/web-audio-api#354 (1 comment by @rtoy)
-
-
36 pull requests opened.
-
Fix #348 add AudioContext constructor dictionary with buffer hint WebAudio/web-audio-api#651, by @billhofmann.
-
Fix #443: clarify garbage collection lifecycle for decodeAudioData WebAudio/web-audio-api#649, by @billhofmann.
-
Fix #560 clarify loop behavior and time units, also playback start of… WebAudio/web-audio-api#648, by @joeberkovitz.
-
Annotate more synchronous sections WebAudio/web-audio-api#647, by @padenot.
-
Annotate synchronous sections WebAudio/web-audio-api#646, by @padenot.
-
Add <pre> around mathjax WebAudio/web-audio-api#645, by @padenot.
-
Spec the processing model for the Web Audio API WebAudio/web-audio-api#644, by @padenot.
-
Fix #34 by adding ref to video element, on new tidied branch WebAudio/web-audio-api#643, by @billhofmann.
-
SpatialPanner try 2 WebAudio/web-audio-api#639, by @cwilso.
-
Fix #308 by refactoring most of AudioContext into BaseAudioContext. WebAudio/web-audio-api#638, by @joeberkovitz.
-
Fix #260 by using JavaScript for all examples. WebAudio/web-audio-api#637, by @joeberkovitz.
-
Fix #125: remove redundant convolution doc. WebAudio/web-audio-api#636, by @joeberkovitz.
-
Fix #110 by adding explicit section on Audio Signal Values. WebAudio/web-audio-api#635, by @joeberkovitz.
-
Fix #52 by addressing PannerNode and StereoPannerNode limitations explicitly in spec WebAudio/web-audio-api#634, by @joeberkovitz.
-
Add travis-ci support file and badge in the readme WebAudio/web-audio-api#633, by @padenot.
-
createIIRFilter takes double coefficients WebAudio/web-audio-api#632, by @rtoy.
-
Fix #34 one more time, hopefully getting the language right. WebAudio/web-audio-api#630, by @billhofmann.
-
Fix #86 by clarifying channel down-mixing. WebAudio/web-audio-api#629, by @joeberkovitz.
-
Add a list of nodes and reason why they can add latency, in an inform… WebAudio/web-audio-api#627, by @padenot.
-
AudioBufferSourceNode.buffer should only be set once, this fixes #288 WebAudio/web-audio-api#626, by @padenot.
-
Fix #85 by clarifying AudioContext.currentTime and various events' pl… WebAudio/web-audio-api#625, by @joeberkovitz.
-
Specify exponential ramp behavior when previous value is 0 WebAudio/web-audio-api#624, by @rtoy.
-
Hack around wrapping in tidy HTML to keep nicely formatted formulas WebAudio/web-audio-api#622, by @padenot.
-
Specify PeriodicWave coefficients to generate Oscillator waveforms WebAudio/web-audio-api#621, by @rtoy.
-
Spec nominal ranges, nyquist, and behavior when outside the range. WebAudio/web-audio-api#620, by @padenot.
-
setTargetAtTime timeConstant must be positive WebAudio/web-audio-api#618, by @rtoy.
-
Describe getByteTimeDomainData and getByteFrequencyData WebAudio/web-audio-api#617, by @rtoy.
-
Better spec BiquadFilterNode.getFrequencyResponse WebAudio/web-audio-api#615, by @padenot.
-
Add note about using setTargetAtTime for exponential ramp to 0. WebAudio/web-audio-api#613, by @rtoy.
-
Update distance formulas to clamp the distance appropriately. WebAudio/web-audio-api#610, by @rtoy.
-
Update formulas for the panner distance models to say the distance is clamped WebAudio/web-audio-api#609, by @rtoy.
-
Fix #65 by clarifying copy-on-write behavior of WaveShaperNode.curve. WebAudio/web-audio-api#608, by @joeberkovitz.
-
Fix #43 by clarifying effect of disconnecting a node from an AudioPar… WebAudio/web-audio-api#607, by @joeberkovitz.
-
Fixes typo. WebAudio/web-audio-api#605, by @mark-buer.
-
Reformat the spec with tidy WebAudio/web-audio-api#604, by @padenot.
-
Fix #40 Add detail of connecting audio node to AudioParam. WebAudio/web-audio-api#603, by @joeberkovitz.
-
-
16 pull requests merged.
-
SpatialPanner try 2 WebAudio/web-audio-api#639.
-
Add travis-ci support file and badge in the readme WebAudio/web-audio-api#633.
-
AudioBufferSourceNode.buffer should only be set once, this fixes #288 WebAudio/web-audio-api#626.
-
Hack around wrapping in tidy HTML to keep nicely formatted formulas WebAudio/web-audio-api#622.
-
Specify PeriodicWave coefficients to generate Oscillator waveforms WebAudio/web-audio-api#621.
-
Fix #65 by clarifying copy-on-write behavior of WaveShaperNode.curve. WebAudio/web-audio-api#608.
-
Better spec BiquadFilterNode.getFrequencyResponse WebAudio/web-audio-api#615.
-
Describe getByteTimeDomainData and getByteFrequencyData WebAudio/web-audio-api#617.
-
setTargetAtTime timeConstant must be positive WebAudio/web-audio-api#618.
-
Update distance formulas to clamp the distance appropriately. WebAudio/web-audio-api#610.
-
Add note about using setTargetAtTime for exponential ramp to 0. WebAudio/web-audio-api#613.
-
Fix #43 by clarifying effect of disconnecting a node from an AudioPar… WebAudio/web-audio-api#607.
-
Reformat the spec with tidy WebAudio/web-audio-api#604.
-
Fixes typo. WebAudio/web-audio-api#605.
-
Fix #40 Add detail of connecting audio node to AudioParam. WebAudio/web-audio-api#603.
-
Fix #314 - sample rate in createBuffer, OfflineAudioContext WebAudio/web-audio-api#597.
-
-
5 pull requests closed.
-
Fix #34 one more time, hopefully getting the language right. WebAudio/web-audio-api#630.
-
SpatialPanner (replaces PannerNode for 3D spatialization) WebAudio/web-audio-api#589.
-
34-change language on audio file formats to include video-element-supported formats WebAudio/web-audio-api#595.
-
Use rejected promise instead of exception for suspend/resume/close. WebAudio/web-audio-api#501.
-
Update formulas for the panner distance models to say the distance is clamped WebAudio/web-audio-api#609.
-
-
22 pull requests received 50 new comments.
-
Fix #85 by clarifying AudioContext.currentTime and various events' pl… WebAudio/web-audio-api#625 (6 comments by @joeberkovitz, @karlt, @mark-buer, @padenot)
-
Specify exponential ramp behavior when previous value is 0 WebAudio/web-audio-api#624 (5 comments by @padenot, @rtoy)
-
Hack around wrapping in tidy HTML to keep nicely formatted formulas WebAudio/web-audio-api#622 (5 comments by @padenot, @rtoy)
-
Spec nominal ranges, nyquist, and behavior when outside the range. WebAudio/web-audio-api#620 (3 comments by @joeberkovitz, @padenot)
-
SpatialPanner (replaces PannerNode for 3D spatialization) WebAudio/web-audio-api#589 (3 comments by @cwilso, @joeberkovitz)
-
Fix #348 add AudioContext constructor dictionary with buffer hint WebAudio/web-audio-api#651 (2 comments by @padenot)
-
Clarify cancelScheduledValues behavior for setTargetAtTime WebAudio/web-audio-api#580 (2 comments by @mrkishi, @rtoy)
-
Fix #260 by using JavaScript for all examples. WebAudio/web-audio-api#637 (2 comments by @padenot, @rtoy)
-
Specify PeriodicWave coefficients to generate Oscillator waveforms WebAudio/web-audio-api#621 (2 comments by @padenot, @rtoy)
-
Describe getByteTimeDomainData and getByteFrequencyData WebAudio/web-audio-api#617 (2 comments by @padenot, @rtoy)
-
Fix #40 Add detail of connecting audio node to AudioParam. WebAudio/web-audio-api#603 (2 comments by @joeberkovitz, @rtoy)
-
Fix #34 by adding ref to video element, on new tidied branch WebAudio/web-audio-api#643 (1 comment by @billhofmann)
-
Fix #34 one more time, hopefully getting the language right. WebAudio/web-audio-api#630 (1 comment by @billhofmann)
-
34-change language on audio file formats to include video-element-supported formats WebAudio/web-audio-api#595 (1 comment by @billhofmann)
-
Use rejected promise instead of exception for suspend/resume/close. WebAudio/web-audio-api#501 (1 comment by @padenot)
-
Update formulas for the panner distance models to say the distance is clamped WebAudio/web-audio-api#609 (1 comment by @rtoy)
-
Fix #65 by clarifying copy-on-write behavior of WaveShaperNode.curve. WebAudio/web-audio-api#608 (1 comment by @joeberkovitz)
-
Fix #314 - sample rate in createBuffer, OfflineAudioContext WebAudio/web-audio-api#597 (1 comment by @rtoy)
-
WebAudio/web-midi-api
-
5 issues closed.
-
Remove callbacks WebAudio/web-midi-api#139.
-
How should browsers handle software synths that are being used by web apps? WebAudio/web-midi-api#151.
-
Weird DOMHighResTimeStamp usage WebAudio/web-midi-api#143.
-
timestamp argument of `send()` should have a default value of 0 WebAudio/web-midi-api#144.
-
Having Buffering Issues with Data Flow WebAudio/web-midi-api#152.
-
-
6 issues received 14 new comments.
-
Modify MIDIOptions to be able to specify software synths to be included WebAudio/web-midi-api#150 (4 comments by @cwilso, @toyoshim)
-
Lifetime of MIDIAccess and MIDIPort is still vague WebAudio/web-midi-api#134 (3 comments by @cwilso, @toyoshim)
-
Determine if hardware supports general MIDI instruments. WebAudio/web-midi-api#110 (2 comments by @cwilso, @notator)
-
How should browsers handle software synths that are being used by web apps? WebAudio/web-midi-api#151 (1 comment by @cwilso)
-
-
1 pull request opened.
-
Fix up inputs enumeration example WebAudio/web-midi-api#155, by @natevw.
-
-
1 pull request merged.
-
Fix up inputs enumeration example WebAudio/web-midi-api#155.
-
Participants
-
1 participant left.
-
Jussi Kalliokoski (W3C Invited Experts) left.
-
-
1 organization joined.
-
Intel Corporation joined.
-
GitHub
WebAudio/web-midi-api
-
2 issues opened.
-
Web MIDI Synths WebAudio/web-midi-api#154, by @notator.
-
Changes to the Web MIDI API Mandate? WebAudio/web-midi-api#153, by @notator.
-
-
2 issues closed.
-
Web MIDI Synths WebAudio/web-midi-api#154.
-
Changes to the Web MIDI API Mandate? WebAudio/web-midi-api#153.
-
-
4 issues received 6 new comments.
-
Virtual Instruments/Softsynth support WebAudio/web-midi-api#124 (2 comments by @joeberkovitz, @notator)
-
Modify MIDIOptions to be able to specify software synths to be included WebAudio/web-midi-api#150 (2 comments by @notator, @ryoyakawai)
-
WebAudio/web-audio-api
-
2 issues opened.
-
Fix up reference to Audio EQ cookbook WebAudio/web-audio-api#598, by @rtoy.
-
"the Nyquist frequency" used before defining, used in several places WebAudio/web-audio-api#587, by @sole.
-
-
19 issues closed.
-
AudioParam setter does not work after the execution of automation. WebAudio/web-audio-api#503.
-
Note that setting AudioParam.value will be ignored when any automation events have been set on the object WebAudio/web-audio-api#128.
-
Make the usage of content sniffing for decodeAudioData explicit WebAudio/web-audio-api#57.
-
(DeZippering): De-zippering is not defined WebAudio/web-audio-api#76.
-
AudioParam Automation Example graph missing setTargetAtTime WebAudio/web-audio-api#5.
-
computedPlaybackRate and pitch WebAudio/web-audio-api#497.
-
Fix up reference to Audio EQ cookbook WebAudio/web-audio-api#598.
-
AudioBuffer copyFromChannel/copyToChannel channel index WebAudio/web-audio-api#565.
-
Should copyToChannel affect AudioBuffers acquired by an AudioBufferSourceNode/ConvolverNode? WebAudio/web-audio-api#567.
-
Throw TypeError for out of range arguments WebAudio/web-audio-api#385.
-
Behavior of unconnected nodes needs to be specified WebAudio/web-audio-api#8.
-
Specify exactly what should happen when createScriptProcessor is passed invalid arguments WebAudio/web-audio-api#17.
-
Clarify influence/reference to OpenAL, IPR considerations WebAudio/web-audio-api#70.
-
Biquad: Possibility to set the filters coefficients and not just Q/freq/gain WebAudio/web-audio-api#323.
-
behavior not defined when AudioParam setting invalid value WebAudio/web-audio-api#23.
-
(HardwareScalability): Hardware Scalability section is vague and incomplete WebAudio/web-audio-api#88.
-
What should happen in case of cycles containing a delay node is under-defined WebAudio/web-audio-api#75.
-
Misformatted timeConstant parameter in setTargetAtTime definition WebAudio/web-audio-api#581.
-
Biquad getFrequencyResponse needs clarification WebAudio/web-audio-api#584.
-
-
4 issues reopened.
-
suspend/resume/close should use rejected promise for offline contexts WebAudio/web-audio-api#441, by @padenot.
-
decodeAudioData Prose: avoid video containers that have an audio track WebAudio/web-audio-api#34, by @padenot.
-
Throw TypeError for out of range arguments WebAudio/web-audio-api#385, by @rtoy.
-
Introduction: link "use cases" to the stable Use Cases document WebAudio/web-audio-api#32, by @rtoy.
-
-
27 issues received 64 new comments.
-
Need a way to determine AudioContext time of currently audible signal WebAudio/web-audio-api#12 (10 comments by @joeberkovitz, @padenot, @pozdnyakov, @srikumarks)
-
"the Nyquist frequency" used before defining, used in several places WebAudio/web-audio-api#587 (5 comments by @billhofmann, @cwilso, @hughrawlinson, @rtoy)
-
AudioParam setter does not work after the execution of automation. WebAudio/web-audio-api#503 (4 comments by @hoch, @joeberkovitz, @padenot)
-
Introduction: link "use cases" to the stable Use Cases document WebAudio/web-audio-api#32 (4 comments by @billhofmann, @rtoy)
-
Exposing a playbackPosition property on AudioBufferSourceNode. WebAudio/web-audio-api#2397 (4 comments by @AshleyScirra, @cwilso, @notthetup)
-
(DeZippering): De-zippering is not defined WebAudio/web-audio-api#76 (3 comments by @joeberkovitz, @padenot)
-
AudioBufferSourceNode.playbackRate should be specified as k-rate and not a-rate WebAudio/web-audio-api#55 (3 comments by @billhofmann, @joeberkovitz, @padenot)
-
Make the usage of content sniffing for decodeAudioData explicit WebAudio/web-audio-api#57 (2 comments by @billhofmann, @padenot)
-
Clarify computedPlaybackRate with other attributes WebAudio/web-audio-api#560 (2 comments by @iccir, @joeberkovitz)
-
Sample format: what do +/-Infinity and NaN mean? WebAudio/web-audio-api#110 (2 comments by @billhofmann, @rtoy)
-
Clarify influence/reference to OpenAL, IPR considerations WebAudio/web-audio-api#70 (2 comments by @billhofmann, @joeberkovitz)
-
How to avoid generating garbage in hot paths? WebAudio/web-audio-api#373 (2 comments by @notthetup, @reduz)
-
Need to provide hints to increase buffering for power consumption reasons WebAudio/web-audio-api#348 (1 comment by @joeberkovitz)
-
suspend/resume/close should use rejected promise for offline contexts WebAudio/web-audio-api#441 (1 comment by @padenot)
-
TAG Issue: Explaining ("De-sugaring") the `*Node` Types WebAudio/web-audio-api#255 (1 comment by @billhofmann)
-
Note that setting AudioParam.value will be ignored when any automation events have been set on the object WebAudio/web-audio-api#128 (1 comment by @joeberkovitz)
-
decodeAudioData Prose: avoid video containers that have an audio track WebAudio/web-audio-api#34 (1 comment by @billhofmann)
-
behavior not defined when AudioParam setting invalid value WebAudio/web-audio-api#23 (1 comment by @billhofmann)
-
(HardwareScalability): Hardware Scalability section is vague and incomplete WebAudio/web-audio-api#88 (1 comment by @padenot)
-
What should happen in case of cycles containing a delay node is under-defined WebAudio/web-audio-api#75 (1 comment by @padenot)
-
Specify exactly what should happen when createScriptProcessor is passed invalid arguments WebAudio/web-audio-api#17 (1 comment by @rtoy)
-
AudioParam Automation Example graph missing setTargetAtTime WebAudio/web-audio-api#5 (1 comment by @padenot)
-
Misformatted timeConstant parameter in setTargetAtTime definition WebAudio/web-audio-api#581 (1 comment by @billhofmann)
-
-
15 pull requests opened.
-
Fix some links and capitalizations WebAudio/web-audio-api#602, by @rtoy.
-
Add correct style for notes to comment on disconnected nodes WebAudio/web-audio-api#601, by @joeberkovitz.
-
Link to the mimesniff spec in `decodeAudioData` WebAudio/web-audio-api#600, by @padenot.
-
#598: Adjust reference to Audio EQ Cookbook WebAudio/web-audio-api#599, by @rtoy.
-
Fix #314 - sample rate in createBuffer, OfflineAudioContext WebAudio/web-audio-api#597, by @billhofmann.
-
Add reference(s) to use cases in intro + near end WebAudio/web-audio-api#596, by @billhofmann.
-
34-change language on audio file formats to include video-element-supported formats WebAudio/web-audio-api#595, by @billhofmann.
-
Clarify DelayNode behavior under changing channel count. WebAudio/web-audio-api#594, by @joeberkovitz.
-
Clarify error thrown for invalid createScriptProcessor() arguments. WebAudio/web-audio-api#593, by @joeberkovitz.
-
Clarify uninterrupted operations of unconnected nodes WebAudio/web-audio-api#592, by @joeberkovitz.
-
Use `unsigned long` for index type in copyFromChannel and copyToChannel. WebAudio/web-audio-api#591, by @padenot.
-
Clarify that computedPlaybackRate must be implemented by resampling the audio. WebAudio/web-audio-api#590, by @padenot.
-
SpatialPanner (replaces PannerNode for 3D spatialization) WebAudio/web-audio-api#589, by @cwilso.
-
Clarify the meaning of the operation "acquire the content". WebAudio/web-audio-api#588, by @padenot.
-
Fix #5: Add setTargetAtTime curve to example WebAudio/web-audio-api#586, by @rtoy.
-
-
18 pull requests merged.
-
Fix some links and capitalizations WebAudio/web-audio-api#602.
-
Fix #128: clarify effect of setting the value attribute with respect … WebAudio/web-audio-api#583.
-
Link to the mimesniff spec in `decodeAudioData` WebAudio/web-audio-api#600.
-
Remove dezippering from the spec WebAudio/web-audio-api#393.
-
Add correct style for notes to comment on disconnected nodes WebAudio/web-audio-api#601.
-
Fix #5: Add setTargetAtTime curve to example WebAudio/web-audio-api#586.
-
Clarify DelayNode behavior under changing channel count. WebAudio/web-audio-api#594.
-
Clarify that computedPlaybackRate must be implemented by resampling the audio. WebAudio/web-audio-api#590.
-
#598: Adjust reference to Audio EQ Cookbook WebAudio/web-audio-api#599.
-
Use `unsigned long` for index type in copyFromChannel and copyToChannel. WebAudio/web-audio-api#591.
-
Clarify the meaning of the operation "acquire the content". WebAudio/web-audio-api#588.
-
Clarify that currentTime does not increase when the context is not "running" WebAudio/web-audio-api#500.
-
Add reference(s) to use cases in intro + near end WebAudio/web-audio-api#596.
-
Fix #385, TypeError for out of range values WebAudio/web-audio-api#579.
-
Clarify uninterrupted operations of unconnected nodes WebAudio/web-audio-api#592.
-
Clarify error thrown for invalid createScriptProcessor() arguments. WebAudio/web-audio-api#593.
-
Fix #323: Add IIRFilterNode WebAudio/web-audio-api#556.
-
Describe constraints for getFrequencyResponse. WebAudio/web-audio-api#585.
-
-
1 pull request reopened.
-
Describe constraints for getFrequencyResponse. WebAudio/web-audio-api#585, by @padenot.
-
-
13 pull requests received 26 new comments.
-
Fix #5: Add setTargetAtTime curve to example WebAudio/web-audio-api#586 (5 comments by @chrislo, @padenot, @rtoy)
-
Fix #314 - sample rate in createBuffer, OfflineAudioContext WebAudio/web-audio-api#597 (4 comments by @billhofmann, @rtoy)
-
Link to the mimesniff spec in `decodeAudioData` WebAudio/web-audio-api#600 (3 comments by @notthetup, @padenot, @rtoy)
-
Fix #385, TypeError for out of range values WebAudio/web-audio-api#579 (3 comments by @billhofmann, @rtoy)
-
Clarify uninterrupted operations of unconnected nodes WebAudio/web-audio-api#592 (2 comments by @joeberkovitz, @rtoy)
-
Clarify error thrown for invalid createScriptProcessor() arguments. WebAudio/web-audio-api#593 (2 comments by @joeberkovitz, @rtoy)
-
Add correct style for notes to comment on disconnected nodes WebAudio/web-audio-api#601 (1 comment by @rtoy)
-
34-change language on audio file formats to include video-element-supported formats WebAudio/web-audio-api#595 (1 comment by @padenot)
-
Clarify the meaning of the operation "acquire the content". WebAudio/web-audio-api#588 (1 comment by @rtoy)
-
Clarify that currentTime does not increase when the context is not "running" WebAudio/web-audio-api#500 (1 comment by @rtoy)
-
Clarify that computedPlaybackRate must be implemented by resampling the audio. WebAudio/web-audio-api#590 (1 comment by @rtoy)
-
Use `unsigned long` for index type in copyFromChannel and copyToChannel. WebAudio/web-audio-api#591 (1 comment by @rtoy)
-
GitHub
WebAudio/web-audio-api
-
8 issues opened.
-
Biquad getFrequencyResponse needs clarification WebAudio/web-audio-api#584, by @rtoy.
-
Inconsistent description of audio node .value WebAudio/web-audio-api#582, by @rtoy.
-
Misformatted timeConstant parameter in setTargetAtTime definition WebAudio/web-audio-api#581, by @billhofmann.
-
Expose under-runs in audio context WebAudio/web-audio-api#577, by @mdjp.
-
How to debug audio node connections? WebAudio/web-audio-api#575, by @lukephills.
-
Interaction of automation methods is unclear WebAudio/web-audio-api#573, by @rtoy.
-
Bad description for setValueAtTime followed by linear or exponential ramp WebAudio/web-audio-api#572, by @rtoy.
-
getByteTimeDomainData and getByteFrequencyData are underspecified WebAudio/web-audio-api#571, by @rtoy.
-
-
9 issues closed.
-
Remove cpuUsage and priority attributes for AudioNodes? WebAudio/web-audio-api#413.
-
BiquadFilterNode - Missing default values WebAudio/web-audio-api#51.
-
Make AudioParam value attribute be a double instead of float WebAudio/web-audio-api#465.
-
(setValueCurveAtTime): AudioParam.setValueCurveAtTime WebAudio/web-audio-api#131.
-
Missing descriptions for parameters of automation functions WebAudio/web-audio-api#564.
-
cancelScheduledValues() should cancel active setTargetAtTime automation also WebAudio/web-audio-api#536.
-
MediaElementSourceNode should have start/stop methods ala AudioBufferSourceNode WebAudio/web-audio-api#512.
-
Multiple calls to stop allowed WebAudio/web-audio-api#297.
-
-
18 issues received 26 new comments.
-
Should copyToChannel affect AudioBuffers acquired by an AudioBufferSourceNode/ConvolverNode? WebAudio/web-audio-api#567 (6 comments by @gerrybeauregard, @joeberkovitz, @karlt, @rtoy)
-
currentTime in AudioContext is not progressing while suspended anymore WebAudio/web-audio-api#460 (2 comments by @billhofmann, @joeberkovitz)
-
MediaElementSourceNode should have start/stop methods ala AudioBufferSourceNode WebAudio/web-audio-api#512 (2 comments by @billhofmann)
-
AudioParam setter does not work after the execution of automation. WebAudio/web-audio-api#503 (1 comment by @hoch)
-
cancelScheduledValues() should cancel active setTargetAtTime automation also WebAudio/web-audio-api#536 (1 comment by @billhofmann)
-
Specify exactly what should happen when createScriptProcessor is passed invalid arguments WebAudio/web-audio-api#17 (1 comment by @billhofmann)
-
getByteTimeDomainData and getByteFrequencyData are underspecified WebAudio/web-audio-api#571 (1 comment by @notthetup)
-
Should specify what happens if an out-of-range value is set for PannerNode.panningModel and PannerNode.distanceModel WebAudio/web-audio-api#11 (1 comment by @rtoy)
-
Need to provide hints to increase buffering for power consumption reasons WebAudio/web-audio-api#348 (1 comment by @bjornm)
-
-
7 pull requests opened.
-
Describe constraints for getFrequencyResponse. WebAudio/web-audio-api#585, by @rtoy.
-
Fix #128: clarify effect of setting the value attribute with respect … WebAudio/web-audio-api#583, by @joeberkovitz.
-
Clarify cancelScheduledValues behavior for setTargetAtTime WebAudio/web-audio-api#580, by @billhofmann.
-
Fix #385, TypeError for out of range values WebAudio/web-audio-api#579, by @billhofmann.
-
Clarify use of AudioBufferSourceNode and provide recommendation for non-memory assets WebAudio/web-audio-api#578, by @billhofmann.
-
Update wording for AudioBufferSourceNode start (called only once) and stop (can be called multiple times). WebAudio/web-audio-api#576, by @billhofmann.
-
Fix 572: add links to the appropriate entries. WebAudio/web-audio-api#574, by @rtoy.
-
-
6 pull requests merged.
-
Fix #131: specify linear interpolation for setValueCurveAtTime WebAudio/web-audio-api#570.
-
Fix #564: Add descriptions of the parameters for automation functions. WebAudio/web-audio-api#568.
-
Clarify cancelScheduledValues behavior for setTargetAtTime WebAudio/web-audio-api#580.
-
Clarify use of AudioBufferSourceNode and provide recommendation for non-memory assets WebAudio/web-audio-api#578.
-
Update wording for AudioBufferSourceNode start (called only once) and stop (can be called multiple times). WebAudio/web-audio-api#576.
-
Fix 572: add links to the appropriate entries. WebAudio/web-audio-api#574.
-
-
5 pull requests received 15 new comments.
-
Fix #128: clarify effect of setting the value attribute with respect … WebAudio/web-audio-api#583 (3 comments by @joeberkovitz, @rtoy)
-
Update wording for AudioBufferSourceNode start (called only once) and stop (can be called multiple times). WebAudio/web-audio-api#576 (2 comments by @billhofmann, @padenot)
-
Clarify that currentTime does not increase when the context is not "running" WebAudio/web-audio-api#500 (1 comment by @padenot)
-
Clarify use of AudioBufferSourceNode and provide recommendation for non-memory assets WebAudio/web-audio-api#578 (1 comment by @padenot)
WebAudio/web-midi-api
-
1 issue received 1 new comment.
Participants
-
1 organization left.
-
MStar Semiconductor, Inc. left.
-
GitHub
WebAudio/web-audio-api
-
6 issues opened.
-
Specify the coefficients used in the oscillator for the basic waveforms WebAudio/web-audio-api#569, by @rtoy.
-
Should copyToChannel affect AudioBuffers acquired by an AudioBufferSourceNode/ConvolverNode? WebAudio/web-audio-api#567, by @SteveBeckerMSFT.
-
Event Constructors WebAudio/web-audio-api#566, by @SteveBeckerMSFT.
-
AudioBuffer copyFromChannel/copyToChannel channel index WebAudio/web-audio-api#565, by @SteveBeckerMSFT.
-
Missing descriptions for parameters of automation functions WebAudio/web-audio-api#564, by @rtoy.
-
BiquadFilterNode getFrequencyResponse on positive gains WebAudio/web-audio-api#563, by @andremichelle.
-
-
8 issues closed.
-
PeriodicWave is limited to 4096 WebAudio/web-audio-api#386.
-
AnalyserNode specification is inconsistent about the units of its outputs WebAudio/web-audio-api#416.
-
SetValueCurveAtTime interpolation not specified WebAudio/web-audio-api#547.
-
(WaveTableNormalization): WaveTable normalization in createWaveTable not clearly defined WebAudio/web-audio-api#91.
-
InvalidAccessError for WaveShaperNode.curve? WebAudio/web-audio-api#464.
-
Analyser size is quite limiting WebAudio/web-audio-api#375.
-
AudioParam rates for BiquadFilterNode are inconsistant WebAudio/web-audio-api#509.
-
BiquadFilterNode getFrequencyResponse on positive gains WebAudio/web-audio-api#563.
-
-
16 issues received 43 new comments.
-
Handling attributes set to null WebAudio/web-audio-api#436 (11 comments by @cwilso, @joeberkovitz, @karlt, @rtoy)
-
A NoiseGate/Expander node would be a good addition to the API. WebAudio/web-audio-api#2395 (8 comments by @cwilso, @hoch, @jernoble, @mdjp)
-
AudioParam rates for BiquadFilterNode are inconsistant WebAudio/web-audio-api#509 (5 comments by @billhofmann, @g200kg, @rtoy)
-
BiquadFilterNode getFrequencyResponse on positive gains WebAudio/web-audio-api#563 (2 comments by @andremichelle, @rtoy)
-
(HTMLMediaElementSync): HTMLMediaElement synchronisation WebAudio/web-audio-api#78 (2 comments by @adelespinasse, @cwilso)
-
Make AudioParam value attribute be a double instead of float WebAudio/web-audio-api#465 (1 comment by @rtoy)
-
Should copyToChannel affect AudioBuffers acquired by an AudioBufferSourceNode/ConvolverNode? WebAudio/web-audio-api#567 (1 comment by @padenot)
-
suspend/resume/close should use rejected promise for offline contexts WebAudio/web-audio-api#441 (1 comment by @rtoy)
-
"Duration" undefined in case of looping AudioBufferSourceNode WebAudio/web-audio-api#421 (1 comment by @joeberkovitz)
-
Clarify computedPlaybackRate with other attributes WebAudio/web-audio-api#560 (1 comment by @joeberkovitz)
-
-
3 pull requests opened.
-
Fix #131: specify linear interpolation for setValueCurveAtTime WebAudio/web-audio-api#570, by @rtoy.
-
Fix #564: Add descriptions of the parameters for automation functions. WebAudio/web-audio-api#568, by @rtoy.
-
fix #509, change k-rate to a-rate. WebAudio/web-audio-api#562, by @billhofmann.
-
-
9 pull requests merged.
-
Use mathematical notation for panner distance formulas WebAudio/web-audio-api#555.
-
Fix #416: Specify the units for the frequency data WebAudio/web-audio-api#554.
-
Fix #547: Define index for setValueCurveAtTime WebAudio/web-audio-api#553.
-
Display automation formulas mathematically WebAudio/web-audio-api#549.
-
Add optional normalization parameter to createPeriodicWave WebAudio/web-audio-api#545.
-
InvalidStateError must be thrown if WaveShaper curve is too short. WebAudio/web-audio-api#542.
-
Fix issue 442: Update Lifetime section to say it's informative. WebAudio/web-audio-api#515.
-
suspend() and resume() for OfflineAudioContext WebAudio/web-audio-api#561.
-
fix #509, change k-rate to a-rate. WebAudio/web-audio-api#562.
-
-
1 pull request closed.
-
441 invalid access error for offline suspend/resume/close WebAudio/web-audio-api#514.
-
-
6 pull requests received 36 new comments.
-
441 invalid access error for offline suspend/resume/close WebAudio/web-audio-api#514 (3 comments by @hoch, @padenot, @rtoy)
WebAudio/web-midi-api
-
1 issue opened.
-
Having Buffering Issues with Data Flow WebAudio/web-midi-api#152, by @cynex.
-
-
2 issues received 11 new comments.
-
Having Buffering Issues with Data Flow WebAudio/web-midi-api#152 (7 comments by @bome, @cwilso, @cynex)
-
Modify MIDIOptions to be able to specify software synths to be included WebAudio/web-midi-api#150 (4 comments by @bome, @cwilso, @toyoshim)
-
Participants
-
1 organization joined.
-
Plantronics, Inc. joined.
-
GitHub
WebAudio/web-audio-api
-
8 issues opened.
-
Clarify computedPlaybackRate with other attributes WebAudio/web-audio-api#560, by @iccir.
-
Description of attributes for WaveShaperNode displayed strangely WebAudio/web-audio-api#548, by @rtoy.
-
SetValueCurveAtTime interpolation not specified WebAudio/web-audio-api#547, by @rtoy.
-
PeriodicWave with arrays of length < 2 is useless WebAudio/web-audio-api#544, by @rtoy.
-
Expose arrays in a PeriodicWave object that were used to create it? WebAudio/web-audio-api#2403, by @rtoy.
-
Phase-offset of oscillator nodes WebAudio/web-audio-api#2402, by @pendragon-andyh.
-
Biquad: Allpass filter WebAudio/web-audio-api#539, by @rtoy.
-
cancelScheduledValues() should cancel active setTargetAtTime automation also WebAudio/web-audio-api#536, by @cwilso.
-
-
44 issues closed.
-
(WaveShaperNodeCurveLength): WaveShaperNode curve length limit WebAudio/web-audio-api#90.
-
Valid values for ScriptProcessor channelCount and channelCountMode? WebAudio/web-audio-api#357.
-
Use current names for DOM exceptions WebAudio/web-audio-api#379.
-
Issues with Oscillator.type "custom" WebAudio/web-audio-api#311.
-
Range of cone angles for PannerNode? WebAudio/web-audio-api#356.
-
PeriodicWave with arrays of length < 2 is useless WebAudio/web-audio-api#544.
-
Define FFT for AnalyzerNode WebAudio/web-audio-api#470.
-
AudioNode.channelCount = 0 throws NotSupportedError WebAudio/web-audio-api#480.
-
Biquad shelf and peaking filters use Q WebAudio/web-audio-api#417.
-
Description of attributes for WaveShaperNode displayed strangely WebAudio/web-audio-api#548.
-
Biquad: Notch filter WebAudio/web-audio-api#429.
-
Biquad: Peaking filter WebAudio/web-audio-api#430.
-
Biquad: Lowshelf filter WebAudio/web-audio-api#431.
-
Biquad: Highshelf filter WebAudio/web-audio-api#432.
-
Biquad: Lowpass filter WebAudio/web-audio-api#426.
-
Biquad: Highpass filter WebAudio/web-audio-api#427.
-
Biquad: Bandpass filter WebAudio/web-audio-api#428.
-
Define coneOuterGain better WebAudio/web-audio-api#504.
-
Biquad: Allpass filter WebAudio/web-audio-api#539.
-
Use correct value for the max size of arrays in PeriodicWave WebAudio/web-audio-api#477.
-
Unclear semantics of duration param to AudioBufferSourceNode.start() WebAudio/web-audio-api#71.
-
AudioNode.disconnect() needs to be able to disconnect only one connection WebAudio/web-audio-api#6.
-
Difficult to address specific channel in ChannelMergerNode WebAudio/web-audio-api#304.
-
Clarify suspend/resume on AudioContexts WebAudio/web-audio-api#361.
-
Map AudioContext times to DOM timestamps WebAudio/web-audio-api#340.
-
More clarifications for BiquadFilterNode needed. WebAudio/web-audio-api#419.
-
Dezippering: createAnalyser WebAudio/web-audio-api#518.
-
Dezippering: createBiquadFilter WebAudio/web-audio-api#519.
-
Dezippering: createBufferSource WebAudio/web-audio-api#520.
-
Dezippering: createDelay WebAudio/web-audio-api#524.
-
Dezippering: createDynamicsCompressor WebAudio/web-audio-api#525.
-
Dezipper: createGain WebAudio/web-audio-api#526.
-
Dezipper: createOscillator WebAudio/web-audio-api#527.
-
Dezipper: createPanner WebAudio/web-audio-api#528.
-
Dezippering: close() WebAudio/web-audio-api#517.
-
source AudioNodes need a `start` event and something like a `isPlaying` state WebAudio/web-audio-api#513.
-
Envelope Scheduling Issue WebAudio/web-audio-api#510.
-
Clarification on GainNode's gain parameter WebAudio/web-audio-api#506.
-
Define DOM exceptions for DecodeErrorCallback WebAudio/web-audio-api#489.
-
Intrinsic value of AudioParam after disconnection WebAudio/web-audio-api#482.
-
Should Convolver normalisation be based on integrated energy? WebAudio/web-audio-api#481.
-
Clarify real array usage in createPeriodicWave WebAudio/web-audio-api#478.
-
PannerNode specification inconsistent WebAudio/web-audio-api#471.
-
ChannelMergerNode in a cycle has unspecified behaviour WebAudio/web-audio-api#459.
-
-
1 issue reopened.
-
Getting AudioParam value at a specific point in time is unclear WebAudio/web-audio-api#318, by @joeberkovitz.
-
-
67 issues received 100 new comments.
-
Handling attributes set to null WebAudio/web-audio-api#436 (10 comments by @cwilso, @ehsan, @joeberkovitz, @padenot)
-
Clarify constraint for positive value for exponentialRampToValue WebAudio/web-audio-api#486 (5 comments by @joeberkovitz, @rtoy)
-
PeriodicWave with arrays of length < 2 is useless WebAudio/web-audio-api#544 (4 comments by @joeberkovitz, @karlt, @rtoy)
-
Audio nodes should expose their intrinsic latency. WebAudio/web-audio-api#469 (4 comments by @cwilso, @joeberkovitz)
-
Define built-in oscillator output more carefully WebAudio/web-audio-api#447 (3 comments by @joeberkovitz, @karlt, @rtoy)
-
OfflineAudioContext progressive rendering WebAudio/web-audio-api#302 (2 comments by @hoch, @joeberkovitz)
-
(setValueCurveAtTime): AudioParam.setValueCurveAtTime WebAudio/web-audio-api#131 (2 comments by @padenot, @rtoy)
-
Filter node pops when frequency parameter is modulated below 0 WebAudio/web-audio-api#247 (2 comments by @padenot, @rtoy)
-
Valid values for ScriptProcessor channelCount and channelCountMode? WebAudio/web-audio-api#357 (2 comments by @padenot, @rtoy)
-
(LinearConvolution): Linear convolution effect is defined by Wikipedia WebAudio/web-audio-api#125 (2 comments by @rtoy)
-
Dynamic modification of looping: (4.10.3) doesn't specify what happens when setting 'loop' to false on a playing source WebAudio/web-audio-api#281 (2 comments by @Cwiiis, @cwilso)
-
Specify nominal ranges for AudioParam WebAudio/web-audio-api#391 (2 comments by @notthetup, @padenot)
-
AudioFrequencyWorkerNode for working in the Frequency Domain WebAudio/web-audio-api#468 (2 comments by @cwilso, @joeberkovitz)
-
(HTMLMediaElementSync): HTMLMediaElement synchronisation WebAudio/web-audio-api#78 (1 comment by @adelespinasse)
-
(WaveShaperNodeCurveLength): WaveShaperNode curve length limit WebAudio/web-audio-api#90 (1 comment by @rtoy)
-
The order in which Promises are returned, rejected, or resolved is ambiguous. WebAudio/web-audio-api#535 (1 comment by @joeberkovitz)
-
SetValueCurveAtTime interpolation not specified WebAudio/web-audio-api#547 (1 comment by @joeberkovitz)
-
Description of attributes for WaveShaperNode displayed strangely WebAudio/web-audio-api#548 (1 comment by @rtoy)
-
OscillatorNode's frequency attributes nominal range should be specced WebAudio/web-audio-api#273 (1 comment by @rtoy)
-
Use correct value for the max size of arrays in PeriodicWave WebAudio/web-audio-api#477 (1 comment by @rtoy)
-
Access to a different output device: AudioContext.setSinkId() WebAudio/web-audio-api#2400 (1 comment by @joeberkovitz)
-
Specify what should happen when the input channel count changes for delay nodes WebAudio/web-audio-api#25 (1 comment by @joeberkovitz)
-
Note that setting AudioParam.value will be ignored when any automation events have been set on the object WebAudio/web-audio-api#128 (1 comment by @joeberkovitz)
-
TAG issue: Constructibility & De-sugaring of static methods WebAudio/web-audio-api#250 (1 comment by @joeberkovitz)
-
Use consistent language and approach to document algorithms WebAudio/web-audio-api#260 (1 comment by @joeberkovitz)
-
Unclear semantics of duration param to AudioBufferSourceNode.start() WebAudio/web-audio-api#71 (1 comment by @cwilso)
-
Storing AudioBuffers in native sample bit depth (was: Add support for 16-bit sample type?) WebAudio/web-audio-api#2396 (1 comment by @joeberkovitz)
-
Tail-time reference should be noted for Convolver, Delay, AudioWorker WebAudio/web-audio-api#414 (1 comment by @joeberkovitz)
-
start(), stop() and AudioParam methods should throw for NaN and Infinity WebAudio/web-audio-api#354 (1 comment by @cwilso)
-
AudioNode.disconnect() needs to be able to disconnect only one connection WebAudio/web-audio-api#6 (1 comment by @cwilso)
-
Difficult to address specific channel in ChannelMergerNode WebAudio/web-audio-api#304 (1 comment by @cwilso)
-
Getting AudioParam value at a specific point in time is unclear WebAudio/web-audio-api#318 (1 comment by @joeberkovitz)
-
Need a way to determine AudioContext time of currently audible signal WebAudio/web-audio-api#12 (1 comment by @joeberkovitz)
-
source AudioNodes need a `start` event and something like a `isPlaying` state WebAudio/web-audio-api#513 (1 comment by @joeberkovitz)
-
MediaElementSourceNode should have start/stop methods ala AudioBufferSourceNode WebAudio/web-audio-api#512 (1 comment by @joeberkovitz)
-
AudioParam rates for BiquadFilterNode are inconsistant WebAudio/web-audio-api#509 (1 comment by @joeberkovitz)
-
AudioParam setter does not work after the execution of automation. WebAudio/web-audio-api#503 (1 comment by @joeberkovitz)
-
Intrinsic value of AudioParam after disconnection WebAudio/web-audio-api#482 (1 comment by @joeberkovitz)
-
Should Convolver normalisation be based on integrated energy? WebAudio/web-audio-api#481 (1 comment by @joeberkovitz)
-
AudioNode.channelCount = 0 throws NotSupportedError WebAudio/web-audio-api#480 (1 comment by @joeberkovitz)
-
Clarify real array usage in createPeriodicWave WebAudio/web-audio-api#478 (1 comment by @joeberkovitz)
-
Allow arraybuffers to be made immutable and shared between main and audioworkernode threads WebAudio/web-audio-api#474 (1 comment by @joeberkovitz)
-
Make AudioParam value attribute be a double instead of float WebAudio/web-audio-api#465 (1 comment by @joeberkovitz)
-
InvalidAccessError for WaveShaperNode.curve? WebAudio/web-audio-api#464 (1 comment by @joeberkovitz)
-
currentTime in AudioContext is not progressing while suspended anymore WebAudio/web-audio-api#460 (1 comment by @joeberkovitz)
-
Clearly state that AudioContext.currentTime is time of next-processed block WebAudio/web-audio-api#381 (1 comment by @joeberkovitz)
-
ChannelMergerNode in a cycle has unspecified behaviour WebAudio/web-audio-api#459 (1 comment by @joeberkovitz)
-
(CircularRouting): Circular graphs should exist while observable? WebAudio/web-audio-api#452 (1 comment by @joeberkovitz)
-
Ordering of onstatechange and oncomplete for OfflineAudioContext WebAudio/web-audio-api#444 (1 comment by @joeberkovitz)
-
-
18 pull requests opened.
-
suspend() and resume() for OfflineAudioContext WebAudio/web-audio-api#561, by @hoch.
-
Cannot change channelCountMode and channelCount for ScriptProcessor WebAudio/web-audio-api#559, by @rtoy.
-
Use current names for DOM exceptions WebAudio/web-audio-api#558, by @rtoy.
-
Throw InvalidStateError when setting oscillator type to 'custom'. WebAudio/web-audio-api#557, by @rtoy.
-
Fix #323: Add IIRFilterNode WebAudio/web-audio-api#556, by @rtoy.
-
Use mathematical notation for panner distance formulas WebAudio/web-audio-api#555, by @rtoy.
-
Fix #416: Specify the units for the frequency data WebAudio/web-audio-api#554, by @rtoy.
-
Fix #547: Define index for setValueCurveAtTime WebAudio/web-audio-api#553, by @rtoy.
-
Fix #447: Define oscillator carefully. WebAudio/web-audio-api#552, by @rtoy.
-
Define FFT for AnalyserNode WebAudio/web-audio-api#551, by @rtoy.
-
Fix #480: channelCount throws NotSupportedError for invalid values. WebAudio/web-audio-api#550, by @rtoy.
-
Display automation formulas mathematically WebAudio/web-audio-api#549, by @rtoy.
-
Display formulas for the basic oscillator waves nicely. WebAudio/web-audio-api#546, by @rtoy.
-
Add optional normalization parameter to createPeriodicWave WebAudio/web-audio-api#545, by @rtoy.
-
InvalidStateError must be thrown if WaveShaper curve is too short. WebAudio/web-audio-api#542, by @rtoy.
-
Use correct formulas for biquad filters WebAudio/web-audio-api#540, by @rtoy.
-
Fix issue #386. WebAudio/web-audio-api#538, by @rtoy.
-
Define outer cone gain better WebAudio/web-audio-api#537, by @rtoy.
-
-
9 pull requests merged.
-
Cannot change channelCountMode and channelCount for ScriptProcessor WebAudio/web-audio-api#559.
-
Use current names for DOM exceptions WebAudio/web-audio-api#558.
-
Throw InvalidStateError when setting oscillator type to 'custom'. WebAudio/web-audio-api#557.
-
Define FFT for AnalyserNode WebAudio/web-audio-api#551.
-
Fix #480: channelCount throws NotSupportedError for invalid values. WebAudio/web-audio-api#550.
-
Display formulas for the basic oscillator waves nicely. WebAudio/web-audio-api#546.
-
Use correct formulas for biquad filters WebAudio/web-audio-api#540.
-
Fix issue #386. WebAudio/web-audio-api#538.
-
Define outer cone gain better WebAudio/web-audio-api#537.
-
-
3 pull requests received 15 new comments.
-
Use rejected promise instead of exception for suspend/resume/close. WebAudio/web-audio-api#501 (1 comment by @rtoy)
WebAudio/web-midi-api
-
3 issues opened.
-
How should browsers handle software synths that are being used by web apps? WebAudio/web-midi-api#151, by @notator.
-
Modify MIDIOptions to be able to specify software synths to be included WebAudio/web-midi-api#150, by @toyoshim.
-
Example code in 9.3 Listing Inputs and Outputs has typoes WebAudio/web-midi-api#149, by @toyoshim.
-
-
2 issues closed.
-
Example code in 9.3 Listing Inputs and Outputs has typoes WebAudio/web-midi-api#149.
-
Web Midi Logo WebAudio/web-midi-api#137.
-
-
7 issues received 35 new comments.
-
Does MIDIPort.id need to be origin-scoped and/or regenerated with cookies? WebAudio/web-midi-api#48 (7 comments by @agoode, @annevk, @cwilso)
-
Expose system-level grouping of MIDIPorts WebAudio/web-midi-api#148 (7 comments by @agoode, @bome, @cwilso, @toyoshim)
-
Modify MIDIOptions to be able to specify software synths to be included WebAudio/web-midi-api#150 (6 comments by @notator, @nwsw, @toyoshim)
-
Example code in 9.3 Listing Inputs and Outputs has typoes WebAudio/web-midi-api#149 (1 comment by @toyoshim)
GitHub
WebAudio/web-midi-api
-
1 issue opened.
-
Expose system-level grouping of MIDIPorts WebAudio/web-midi-api#148, by @agoode.
-
-
1 issue received 3 new comments.
-
Expose system-level grouping of MIDIPorts WebAudio/web-midi-api#148 (3 comments by @agoode, @bome, @toyoshim)
-
WebAudio/web-audio-api
-
17 issues opened.
-
The order in which Promises are returned, rejected, or resolved is ambiguous. WebAudio/web-audio-api#535, by @jernoble.
-
toDataURL / toBlob for AudioContext WebAudio/web-audio-api#533, by @ghost.
-
Impedance mismatch between the Web Worker text and what is possible/needed for the AudioWorker WebAudio/web-audio-api#532, by @padenot.
-
Spec is broken WebAudio/web-audio-api#529, by @silviapfeiffer.
-
Dezipper: createPanner WebAudio/web-audio-api#528, by @rtoy.
-
Dezipper: createOscillator WebAudio/web-audio-api#527, by @rtoy.
-
Dezipper: createGain WebAudio/web-audio-api#526, by @rtoy.
-
Dezippering: createDynamicsCompressor WebAudio/web-audio-api#525, by @rtoy.
-
Dezippering: createDelay WebAudio/web-audio-api#524, by @rtoy.
-
Dezippering: createConvolver WebAudio/web-audio-api#523, by @rtoy.
-
Dezippering: createChannelSplitter WebAudio/web-audio-api#522, by @rtoy.
-
Dezippering: createChannelMerger WebAudio/web-audio-api#521, by @rtoy.
-
Dezippering: createBufferSource WebAudio/web-audio-api#520, by @rtoy.
-
Dezippering: createBiquadFilter WebAudio/web-audio-api#519, by @rtoy.
-
Dezippering: createAnalyser WebAudio/web-audio-api#518, by @rtoy.
-
Dezippering: close() WebAudio/web-audio-api#517, by @rtoy.
-
-
6 issues closed.
-
toDataURL / toBlob for AudioContext WebAudio/web-audio-api#533.
-
where ??? WebAudio/web-audio-api#531.
-
Spec is broken WebAudio/web-audio-api#529.
-
Dezippering: createConvolver WebAudio/web-audio-api#523.
-
Dezippering: createChannelSplitter WebAudio/web-audio-api#522.
-
Dezippering: createChannelMerger WebAudio/web-audio-api#521.
-
-
23 issues received 149 new comments.
-
AudioFrequencyWorkerNode for working in the Frequency Domain WebAudio/web-audio-api#468 (55 comments by @adelespinasse, @andremichelle, @artofmus, @cristiano-belloni, @cwilso, @echo66, @jakubfiala, @jesseallison, @notthetup, @rtoy)
-
Access to a different output device: AudioContext.setSinkId() WebAudio/web-audio-api#2400 (14 comments by @cwilso, @joeberkovitz)
-
progressCallback in decodeAudioData WebAudio/web-audio-api#335 (13 comments by @cwilso, @jernoble, @joeberkovitz, @mark-buer)
-
The order in which Promises are returned, rejected, or resolved is ambiguous. WebAudio/web-audio-api#535 (10 comments by @jernoble, @mark-buer, @padenot, @rtoy, @youennf)
-
OfflineAudioContext progressive rendering WebAudio/web-audio-api#302 (8 comments by @hoch, @joeberkovitz, @karlt, @rtoy)
-
Impedance mismatch between the Web Worker text and what is possible/needed for the AudioWorker WebAudio/web-audio-api#532 (8 comments by @cwilso, @duanyao, @hoch, @joeberkovitz, @notthetup)
-
ConvolverNode: disallow state modification, describe algorithm, clarify language WebAudio/web-audio-api#122 (7 comments by @joeberkovitz, @notthetup, @padenot, @rtoy)
-
Getting AudioParam value at a specific point in time is unclear WebAudio/web-audio-api#318 (4 comments by @cwilso, @joeberkovitz, @notthetup, @padenot)
-
toDataURL / toBlob for AudioContext WebAudio/web-audio-api#533 (3 comments by @ghost, @notthetup, @padenot)
-
Tail-time reference should be noted for Convolver, Delay, AudioWorker WebAudio/web-audio-api#414 (3 comments by @hoch, @joeberkovitz, @rtoy)
-
(DeZippering): De-zippering is not defined WebAudio/web-audio-api#76 (3 comments by @joeberkovitz, @rtoy)
-
Architectural layering: output stream access? WebAudio/web-audio-api#359 (2 comments by @joeberkovitz)
-
Exposing a playbackPosition property on AudioBufferSourceNode. WebAudio/web-audio-api#2397 (1 comment by @NHQ)
-
Filter node pops when frequency parameter is modulated below 0 WebAudio/web-audio-api#247 (1 comment by @padenot)
-
Specify what should happen when the input channel count changes for delay nodes WebAudio/web-audio-api#25 (1 comment by @padenot)
-
AudioBufferSourceNode.buffer should only be set once WebAudio/web-audio-api#288 (1 comment by @padenot)
-
Use consistent language and approach to document algorithms WebAudio/web-audio-api#260 (1 comment by @padenot)
-
-
2 pull requests opened.
-
Fixes dead links to createBuffer & decodeAudioData WebAudio/web-audio-api#534, by @mark-buer.
-
Update index.html WebAudio/web-audio-api#530, by @ouhouhsami.
-
-
2 pull requests merged.
-
Fixes dead links to createBuffer & decodeAudioData WebAudio/web-audio-api#534.
-
Update index.html WebAudio/web-audio-api#530.
-
-
1 pull request received 1 new comment.
-
Fixes dead links to createBuffer & decodeAudioData WebAudio/web-audio-api#534 (1 comment by @padenot)
-
Participants
-
1 organization joined.
-
HTML5 Converged Technology Forum joined.
-
GitHub
WebAudio/web-audio-api
-
8 issues opened.
-
Execution order of ScriptProcessorNodes WebAudio/web-audio-api#516, by @echo66.
-
source AudioNodes need a `start` event and something like a `isPlaying` state WebAudio/web-audio-api#513, by @Prinzhorn.
-
MediaElementSourceNode should have start/stop methods ala AudioBufferSourceNode WebAudio/web-audio-api#512, by @luser.
-
Envelope Scheduling Issue WebAudio/web-audio-api#510, by @dveca.
-
AudioParam rates for BiquadFilterNode are inconsistant WebAudio/web-audio-api#509, by @pendragon-andyh.
-
Why we have to call ctx.createBufferSource() every time? WebAudio/web-audio-api#508, by @mr21.
-
Section 3.1 has a dead link WebAudio/web-audio-api#507, by @iccir.
-
Clarification on GainNode's gain parameter WebAudio/web-audio-api#506, by @iccir.
-
-
7 issues closed.
-
Proper FFT / IFFT missing WebAudio/web-audio-api#248.
-
Audio Workers: number of input/output channels and inputs/outputs WebAudio/web-audio-api#1.
-
Execution order of ScriptProcessorNodes WebAudio/web-audio-api#516.
-
Easy way to get single most recent sample WebAudio/web-audio-api#493.
-
Channel count of scheduled source nodes is unspecified when not playing? WebAudio/web-audio-api#462.
-
Why we have to call ctx.createBufferSource() every time? WebAudio/web-audio-api#508.
-
Section 3.1 has a dead link WebAudio/web-audio-api#507.
-
-
44 issues received 140 new comments.
-
AudioParam rates for BiquadFilterNode are inconsistant WebAudio/web-audio-api#509 (18 comments by @hoch, @jipodine, @luketeaford, @padenot, @rtoy)
-
Note that setting AudioParam.value will be ignored when any automation events have been set on the object WebAudio/web-audio-api#128 (18 comments by @adelespinasse, @cwilso, @hoch, @joeberkovitz, @mark-buer, @notthetup, @rtoy)
-
OfflineAudioContext progressive rendering WebAudio/web-audio-api#302 (13 comments by @hoch, @joeberkovitz, @rtoy)
-
Clarification on GainNode's gain parameter WebAudio/web-audio-api#506 (11 comments by @hoch, @hughrawlinson, @iccir, @notthetup, @padenot)
-
Envelope Scheduling Issue WebAudio/web-audio-api#510 (10 comments by @dveca, @ghost, @karlt, @mark-buer, @notthetup, @rtoy)
-
Map AudioContext times to DOM timestamps WebAudio/web-audio-api#340 (7 comments by @cwilso, @jipodine, @karlt)
-
Execution order of ScriptProcessorNodes WebAudio/web-audio-api#516 (5 comments by @cwilso, @echo66, @notthetup)
-
How to avoid generating garbage in hot paths? WebAudio/web-audio-api#373 (5 comments by @cwilso, @notthetup, @Prinzhorn)
-
Getting AudioParam value at a specific point in time is unclear WebAudio/web-audio-api#318 (4 comments by @joeberkovitz, @padenot, @rtoy)
-
source AudioNodes need a `start` event and something like a `isPlaying` state WebAudio/web-audio-api#513 (3 comments by @cwilso, @jernoble, @Prinzhorn)
-
MediaElementSourceNode should have start/stop methods ala AudioBufferSourceNode WebAudio/web-audio-api#512 (3 comments by @luser, @notthetup, @padenot)
-
Issues with Oscillator.type "custom" WebAudio/web-audio-api#311 (2 comments by @joeberkovitz, @rtoy)
-
Need a AudioMediaStreamTrack-based StreamSourceNode factory method WebAudio/web-audio-api#264 (2 comments by @joeberkovitz, @padenot)
-
Enable AudioContext to be created in a Worker WebAudio/web-audio-api#16 (2 comments by @joeberkovitz)
-
AudioFrequencyWorkerNode for working in the Frequency Domain WebAudio/web-audio-api#468 (2 comments by @echo66, @notthetup)
-
More clarifications for BiquadFilterNode needed. WebAudio/web-audio-api#419 (2 comments by @jipodine, @rtoy)
-
Channel count of scheduled source nodes is unspecified when not playing? WebAudio/web-audio-api#462 (2 comments by @karlt, @mdjp)
-
Why we have to call ctx.createBufferSource() every time? WebAudio/web-audio-api#508 (2 comments by @cwilso, @mr21)
-
Audio Workers: number of input/output channels and inputs/outputs WebAudio/web-audio-api#1 (1 comment by @joeberkovitz)
-
ConvolverNode: disallow state modification, describe algorithm, clarify language WebAudio/web-audio-api#122 (1 comment by @joeberkovitz)
-
TAG Issue: Explaining ("De-sugaring") the `*Node` Types WebAudio/web-audio-api#255 (1 comment by @joeberkovitz)
-
Use consistent language and approach to document algorithms WebAudio/web-audio-api#260 (1 comment by @joeberkovitz)
-
AudioBufferSourceNode.buffer should only be set once WebAudio/web-audio-api#288 (1 comment by @joeberkovitz)
-
Biquad: Possibility to set the filters coefficients and not just Q/freq/gain WebAudio/web-audio-api#323 (1 comment by @joeberkovitz)
-
Clamping loop points and offset for AudioBufferSourceNode WebAudio/web-audio-api#363 (1 comment by @joeberkovitz)
-
Review spec wide behavior on setting enum to invalid values. WebAudio/web-audio-api#383 (1 comment by @joeberkovitz)
-
Tail-time reference should be noted for Convolver, Delay, AudioWorker WebAudio/web-audio-api#414 (1 comment by @joeberkovitz)
-
Access to a different output device: AudioContext.setSinkId() WebAudio/web-audio-api#2400 (1 comment by @joeberkovitz)
-
Dynamic Lifetime section should include explicit lifetime of AudioWorker WebAudio/web-audio-api#475 (1 comment by @joeberkovitz)
-
AudioParam setter does not work after the execution of automation. WebAudio/web-audio-api#503 (1 comment by @hoch)
-
OfflineAudioContext and AudioContext decoding should complete before garbage collection WebAudio/web-audio-api#443 (1 comment by @mdjp)
-
Add a playing reference to MediaElementAudioSourceNode and MediaStreamAudioSourceNode WebAudio/web-audio-api#442 (1 comment by @mdjp)
-
(AudioBufferSourceNodePlaybackRate): AudioBufferSourceNode.playbackRate not strictly defined WebAudio/web-audio-api#95 (1 comment by @joeberkovitz)
-
-
3 pull requests opened.
-
Fix issue 442: Update Lifetime section to say it's informative. WebAudio/web-audio-api#515, by @rtoy.
-
441 invalid access error for offline suspend/resume/close WebAudio/web-audio-api#514, by @rtoy.
-
New factory-based AudioWorkers, with examples. WebAudio/web-audio-api#511, by @cwilso.
-
-
1 pull request merged.
-
New factory-based AudioWorkers, with examples. WebAudio/web-audio-api#511.
-
-
1 pull request received 2 new comments.
-
New factory-based AudioWorkers, with examples. WebAudio/web-audio-api#511 (2 comments by @cwilso, @mark-buer)
-
WebAudio/web-midi-api
-
12 issues opened.
-
Problem with documentation, example 9.4 WebAudio/web-midi-api#146, by @BambiHaber.
-
receivedTime and upcoming DOM update WebAudio/web-midi-api#145, by @annevk.
-
timestamp argument of `send()` should have a default value of 0 WebAudio/web-midi-api#144, by @bzbarsky.
-
Weird DOMHighResTimeStamp usage WebAudio/web-midi-api#143, by @bzbarsky.
-
Text for MIDIOutput.send() implies that passing a Uint8Array will be efficient, but that's not the case WebAudio/web-midi-api#142, by @bzbarsky.
-
Uint8Array now part of IDL/JavaScript WebAudio/web-midi-api#141, by @annevk.
-
Remove callbacks WebAudio/web-midi-api#139, by @annevk.
-
Web Midi Logo WebAudio/web-midi-api#137, by @skratchdot.
-
Sysex access information in MIDIPort? WebAudio/web-midi-api#136, by @qdot.
-
Typos in "4.4: MIDIOutputMap Interface" WebAudio/web-midi-api#135, by @ghost.
-
Lifetime of MIDIAccess and MIDIPort is still vague WebAudio/web-midi-api#134, by @toyoshim.
-
-
4 issues closed.
-
Problem with documentation, example 9.4 WebAudio/web-midi-api#146.
-
Uint8Array now part of IDL/JavaScript WebAudio/web-midi-api#141.
-
Use https WebAudio/web-midi-api#140.
-
Typos in "4.4: MIDIOutputMap Interface" WebAudio/web-midi-api#135.
-
-
1 issue reopened.
-
Web Midi Logo WebAudio/web-midi-api#137, by @skratchdot.
-
-
4 issues received 10 new comments.
-
receivedTime and upcoming DOM update WebAudio/web-midi-api#145 (6 comments by @annevk, @cwilso, @domenic)
-
Text for MIDIOutput.send() implies that passing a Uint8Array will be efficient, but that's not the case WebAudio/web-midi-api#142 (1 comment by @domenic)
-
-
2 pull requests opened.
-
Fixed #146 WebAudio/web-midi-api#147, by @ryoyakawai.
-
a folder for logo prototypes (issue 137) WebAudio/web-midi-api#138, by @skratchdot.
-
-
1 pull request merged.
-
Fixed #146 WebAudio/web-midi-api#147.
-
-
1 pull request closed.
-
a folder for logo prototypes (issue 137) WebAudio/web-midi-api#138.
-
-
2 pull requests received 2 new comments.
TR publications
-
1 document published.
-
Web MIDI API published as a Working Draft. History of Web MIDI API
-
Participants
-
1 organization joined.
-
Electronics and Telecommunications Research Institute (ETRI) joined.
-
GitHub
WebAudio/web-midi-api
-
9 issues opened.
-
Clarification about pending data on device disconnection WebAudio/web-midi-api#133, by @toyoshim.
-
Editorial clarification on MIDIPort.close() WebAudio/web-midi-api#132, by @toyoshim.
-
Editorial issues on MIDIPort.open() algorithm WebAudio/web-midi-api#131, by @toyoshim.
-
Permission exposure: hasMIDIAccess() WebAudio/web-midi-api#129, by @cwilso.
-
spec clarification: allow multiple open() and close() requests, and multiple calls to requestMIDIAccess() WebAudio/web-midi-api#128, by @toyoshim.
-
Missing MIDI Output Devices WebAudio/web-midi-api#126, by @notator.
-
Clarfiy opaque id field for MIDIPort text in spec WebAudio/web-midi-api#125, by @agoode.
-
Virtual Instruments/Softsynth support WebAudio/web-midi-api#124, by @toyoshim.
-
close should be allowed on disconnected port WebAudio/web-midi-api#123, by @agoode.
-
-
12 issues closed.
-
Editorial clarification on MIDIPort.close() WebAudio/web-midi-api#132.
-
Editorial issues on MIDIPort.open() algorithm WebAudio/web-midi-api#131.
-
MIDI input/output disconnection - Ports should be persistent across connects/disconnects WebAudio/web-midi-api#79.
-
Promise usage problems WebAudio/web-midi-api#90.
-
close should be allowed on disconnected port WebAudio/web-midi-api#123.
-
Allow cancelling future output WebAudio/web-midi-api#102.
-
Update spec to reflect addition of maplike<> to WebIDL WebAudio/web-midi-api#115.
-
MIDI Real-Time status messages - clarification needed WebAudio/web-midi-api#47.
-
Clarfiy opaque id field for MIDIPort text in spec WebAudio/web-midi-api#125.
-
Missing MIDI Output Devices WebAudio/web-midi-api#126.
-
ReSpec mangling function parameters WebAudio/web-midi-api#85.
-
MIDIKeyType is undefined WebAudio/web-midi-api#84.
-
-
2 issues reopened.
-
Promise usage problems WebAudio/web-midi-api#90, by @cwilso.
-
MIDI input/output disconnection - Ports should be persistent across connects/disconnects WebAudio/web-midi-api#79, by @cwilso.
-
-
17 issues received 162 new comments.
-
MIDI input/output disconnection - Ports should be persistent across connects/disconnects WebAudio/web-midi-api#79 (55 comments by @agoode, @bome, @cwilso, @jussi-kalliokoski, @toyoshim)
-
Allow cancelling future output WebAudio/web-midi-api#102 (17 comments by @bome, @cwilso, @ghost, @nfroidure, @toyoshim)
-
close should be allowed on disconnected port WebAudio/web-midi-api#123 (15 comments by @agoode, @bome, @cwilso, @toyoshim)
-
Determine if hardware supports general MIDI instruments. WebAudio/web-midi-api#110 (14 comments by @agoode, @cwilso, @ghost, @joeberkovitz, @MidiHax, @notator, @toyoshim)
-
Virtual MIDI ports WebAudio/web-midi-api#45 (11 comments by @agoode, @cwilso, @joeberkovitz, @notator, @toyoshim)
-
Permission exposure: hasMIDIAccess() WebAudio/web-midi-api#129 (10 comments by @agoode, @cwilso, @qdot, @toyoshim)
-
Clarfiy opaque id field for MIDIPort text in spec WebAudio/web-midi-api#125 (7 comments by @agoode, @bome, @cwilso, @toyoshim)
-
Virtual Instruments/Softsynth support WebAudio/web-midi-api#124 (6 comments by @bome, @cwilso, @joeberkovitz, @MidiHax, @notator)
-
Update spec to reflect addition of maplike<> to WebIDL WebAudio/web-midi-api#115 (6 comments by @cwilso, @toyoshim, @yutakahirano)
-
Editorial issues on MIDIPort.open() algorithm WebAudio/web-midi-api#131 (4 comments by @cwilso, @toyoshim)
-
spec clarification: allow multiple open() and close() requests, and multiple calls to requestMIDIAccess() WebAudio/web-midi-api#128 (4 comments by @agoode, @cwilso, @toyoshim)
-
MIDI API should be available from Workers? WebAudio/web-midi-api#99 (4 comments by @cwilso, @joeberkovitz, @MidiHax, @toyoshim)
-
Clarification about pending data on device disconnection WebAudio/web-midi-api#133 (3 comments by @agoode, @cwilso, @toyoshim)
-
-
3 pull requests opened.
-
Fix typo in close method ("connected" is not a MIDIPortConnectionState) WebAudio/web-midi-api#130, by @natevw.
-
Drop maplike workaround as ReSpec supports it. WebAudio/web-midi-api#127, by @yutakahirano.
-
Use maplike<K, V> instead of custome methods / attrs. WebAudio/web-midi-api#122, by @yutakahirano.
-
-
2 pull requests merged.
-
Drop maplike workaround as ReSpec supports it. WebAudio/web-midi-api#127.
-
Use maplike<K, V> instead of custome methods / attrs. WebAudio/web-midi-api#122.
-
-
1 pull request received 1 new comment.
-
Use maplike<K, V> instead of custome methods / attrs. WebAudio/web-midi-api#122 (1 comment by @yutakahirano)
-
WebAudio/web-audio-api
-
9 issues opened.
-
Define coneOuterGain better WebAudio/web-audio-api#504, by @rtoy.
-
AudioParam setter does not work after the execution of automation. WebAudio/web-audio-api#503, by @hoch.
-
Web Audio API WebAudio/web-audio-api#502, by @vaidehismart.
-
computedPlaybackRate and pitch WebAudio/web-audio-api#497, by @iccir.
-
Feature Request - encodeAudioData WebAudio/web-audio-api#496, by @ghost.
-
Easy way to get single most recent sample WebAudio/web-audio-api#493, by @adelespinasse.
-
Define DOM exceptions for DecodeErrorCallback WebAudio/web-audio-api#489, by @rtoy.
-
Update AudioContext WebIDL for suspend/resume/close to use the new Promise syntax WebAudio/web-audio-api#488, by @padenot.
-
Remove or update hardware scalability section WebAudio/web-audio-api#487, by @rtoy.
-
-
6 issues closed.
-
(numberOfInputsOutputs): AudioNode.numberOfInputs and numberOfOutputs WebAudio/web-audio-api#101.
-
Remove or update hardware scalability section WebAudio/web-audio-api#487.
-
Web Audio API WebAudio/web-audio-api#502.
-
Update AudioContext WebIDL for suspend/resume/close to use the new Promise syntax WebAudio/web-audio-api#488.
-
Describe how Nodes created from different AudioContexts interact (or don't) WebAudio/web-audio-api#351.
-
Clamp the gain contributed by the distanceModel WebAudio/web-audio-api#466.
-
-
17 issues received 55 new comments.
-
Biquad: Possibility to set the filters coefficients and not just Q/freq/gain WebAudio/web-audio-api#323 (16 comments by @joeberkovitz, @padenot, @rtoy, @svgeesus)
-
AudioNode.disconnect() needs to be able to disconnect only one connection WebAudio/web-audio-api#6 (6 comments by @hoch, @rtoy, @sebpiq)
-
AudioParam setter does not work after the execution of automation. WebAudio/web-audio-api#503 (4 comments by @notthetup, @rtoy)
-
Feature Request - encodeAudioData WebAudio/web-audio-api#496 (3 comments by @cwilso, @ghost, @padenot)
-
OfflineAudioContext progressive rendering WebAudio/web-audio-api#302 (3 comments by @hoch, @joeberkovitz)
-
Easy way to get single most recent sample WebAudio/web-audio-api#493 (3 comments by @adelespinasse, @cwilso, @notthetup)
-
suspend/resume/close should use rejected promise for offline contexts WebAudio/web-audio-api#441 (2 comments by @padenot, @rtoy)
-
AudioNode.channelCount = 0 throws NotSupportedError WebAudio/web-audio-api#480 (2 comments by @padenot, @rtoy)
-
Define DOM exceptions for DecodeErrorCallback WebAudio/web-audio-api#489 (2 comments by @padenot, @rtoy)
-
Intrinsic value of AudioParam after disconnection WebAudio/web-audio-api#482 (2 comments by @hoch, @padenot)
-
Note that setting AudioParam.value will be ignored when any automation events have been set on the object WebAudio/web-audio-api#128 (1 comment by @rtoy)
-
Difficult to address specific channel in ChannelMergerNode WebAudio/web-audio-api#304 (1 comment by @mdjp)
-
Define the behaviour when disconnect called on node output wired to an AudioParam WebAudio/web-audio-api#43 (1 comment by @hoch)
-
-
10 pull requests opened.
-
6.3 Panning Algorithm: cleaned up, fixed typos. WebAudio/web-audio-api#505, by @hoch.
-
Use rejected promise instead of exception for suspend/resume/close. WebAudio/web-audio-api#501, by @padenot.
-
Clarify that currentTime does not increase when the context is not "running" WebAudio/web-audio-api#500, by @padenot.
-
Remove section on hardware scalability WebAudio/web-audio-api#499, by @padenot.
-
Promises for suspend/resume/close should be parametrized on <void> WebAudio/web-audio-api#498, by @padenot.
-
Value for the cone* members must be used modulo 360 WebAudio/web-audio-api#495, by @padenot.
-
Clarify the numberOf{In,Out}puts description. WebAudio/web-audio-api#494, by @padenot.
-
Added missing names to the WG memeber list WebAudio/web-audio-api#492, by @hoch.
-
Changed behavior of ChannelMergerNode WebAudio/web-audio-api#491, by @hoch.
-
Use HTTPS URLs where possible WebAudio/web-audio-api#490, by @mathiasbynens.
-
-
12 pull requests merged.
-
6.3 Panning Algorithm: cleaned up, fixed typos. WebAudio/web-audio-api#505.
-
Clarify the numberOf{In,Out}puts description. WebAudio/web-audio-api#494.
-
Value for the cone* members must be used modulo 360 WebAudio/web-audio-api#495.
-
Remove section on hardware scalability WebAudio/web-audio-api#499.
-
Promises for suspend/resume/close should be parametrized on <void> WebAudio/web-audio-api#498.
-
Spec that AudioNodes from different contexts can't be connected together WebAudio/web-audio-api#396.
-
Added missing names to the WG memeber list WebAudio/web-audio-api#492.
-
Changed behavior of ChannelMergerNode WebAudio/web-audio-api#491.
-
Use HTTPS URLs where possible WebAudio/web-audio-api#490.
-
Clamp the gain of the `distanceModel` in [0; 1] WebAudio/web-audio-api#467.
-
Clarify real array usage in createPeriodicWave WebAudio/web-audio-api#483.
-
#6 Support selective disconnection WebAudio/web-audio-api#479.
-
-
1 pull request closed.
-
Clarify the numberOf{In,Out}puts description. WebAudio/web-audio-api#410.
-
-
1 pull request reopened.
-
Use HTTPS URLs where possible WebAudio/web-audio-api#490, by @padenot.
-
-
6 pull requests received 8 new comments.
-
#6 Support selective disconnection WebAudio/web-audio-api#479 (3 comments by @hoch, @joeberkovitz, @padenot)
-
Spec that AudioNodes from different contexts can't be connected together WebAudio/web-audio-api#396 (1 comment by @padenot)
-
GitHub
WebAudio/web-midi-api
-
2 issues opened.
-
MIDIInputMap - Conflict with Maplike? WebAudio/web-midi-api#118, by @ghost.
-
Update spec to reflect addition of maplike<> to WebIDL WebAudio/web-midi-api#115, by @qdot.
-
-
6 issues closed.
-
MIDIInputMap - Conflict with Maplike? WebAudio/web-midi-api#118.
-
MIDIPort#open() necessary? WebAudio/web-midi-api#75.
-
MIDIInputMap and MIDIOutputMap are bizarre WebAudio/web-midi-api#91.
-
Should sysex flag be on access to port somehow, rather than system-wide? WebAudio/web-midi-api#114.
-
MIDIPort should have a "state" attribute WebAudio/web-midi-api#105.
-
Tweaks requested for publishing WebAudio/web-midi-api#94.
-
-
8 issues received 19 new comments.
-
MIDIPort should have a "state" attribute WebAudio/web-midi-api#105 (5 comments by @cwilso, @toyoshim)
-
MIDIInputMap - Conflict with Maplike? WebAudio/web-midi-api#118 (3 comments by @cwilso, @ghost, @toyoshim)
-
Should sysex flag be on access to port somehow, rather than system-wide? WebAudio/web-midi-api#114 (3 comments by @cwilso, @mounirlamouri)
-
MIDI input/output disconnection - Ports should be persistent across connects/disconnects WebAudio/web-midi-api#79 (2 comments by @toyoshim)
-
Update spec to reflect addition of maplike<> to WebIDL WebAudio/web-midi-api#115 (2 comments by @yutakahirano)
-
-
5 pull requests opened.
-
MIDIPortState does not have "closed" state WebAudio/web-midi-api#121, by @toyoshim.
-
port should be defined for already opened or closed cases WebAudio/web-midi-api#120, by @toyoshim.
-
Update returning type of requestMIDIAccess() to be Promise<MIDIAccess> WebAudio/web-midi-api#119, by @toyoshim.
-
Add MIDIPort#open() and MIDIPort#close() WebAudio/web-midi-api#117, by @toyoshim.
-
Introduce MIDIPortState WebAudio/web-midi-api#116, by @toyoshim.
-
-
5 pull requests merged.
-
MIDIPortState does not have "closed" state WebAudio/web-midi-api#121.
-
port should be defined for already opened or closed cases WebAudio/web-midi-api#120.
-
Update returning type of requestMIDIAccess() to be Promise<MIDIAccess> WebAudio/web-midi-api#119.
-
Add MIDIPort#open() and MIDIPort#close() WebAudio/web-midi-api#117.
-
Introduce MIDIPortState WebAudio/web-midi-api#116.
-
-
3 pull requests received 5 new comments.
-
Add MIDIPort#open() and MIDIPort#close() WebAudio/web-midi-api#117 (3 comments by @cwilso, @toyoshim)
-
Update returning type of requestMIDIAccess() to be Promise<MIDIAccess> WebAudio/web-midi-api#119 (1 comment by @cwilso)
-
WebAudio/web-audio-api
-
11 issues opened.
-
Clarify constraint for positive value for exponentialRampToValue WebAudio/web-audio-api#486, by @rtoy.
-
AudioWorkerNode buffer size WebAudio/web-audio-api#484, by @echo66.
-
Intrinsic value of AudioParam after disconnection WebAudio/web-audio-api#482, by @hoch.
-
Should Convolver normalisation be based on integrated energy? WebAudio/web-audio-api#481, by @chrispike-bbc.
-
AudioNode.channelCount = 0 throws NotSupportedError WebAudio/web-audio-api#480, by @rtoy.
-
Clarify real array usage in createPeriodicWave WebAudio/web-audio-api#478, by @rtoy.
-
Use correct value for the max size of arrays in PeriodicWave WebAudio/web-audio-api#477, by @rtoy.
-
AudioWorkerNode should still work if not connected to destination WebAudio/web-audio-api#476, by @hughrawlinson.
-
Dynamic Lifetime section should include explicit lifetime of AudioWorker WebAudio/web-audio-api#475, by @cwilso.
-
Allow arraybuffers to be made immutable and shared between main and audioworkernode threads WebAudio/web-audio-api#474, by @charlieschwabacher.
-
Trigger events at a specified AudioContext time WebAudio/web-audio-api#473, by @joeberkovitz.
-
-
3 issues closed.
-
AudioWorkerNode buffer size WebAudio/web-audio-api#484.
-
AudioWorkerNode should still work if not connected to destination WebAudio/web-audio-api#476.
-
Trigger events at a specified AudioContext time WebAudio/web-audio-api#473.
-
-
25 issues received 80 new comments.
-
Trigger events at a specified AudioContext time WebAudio/web-audio-api#473 (12 comments by @cwilso, @joeberkovitz, @kunstmusik, @padenot)
-
Clarify constraint for positive value for exponentialRampToValue WebAudio/web-audio-api#486 (7 comments by @karlt, @rtoy)
-
Intrinsic value of AudioParam after disconnection WebAudio/web-audio-api#482 (5 comments by @hoch, @notthetup)
-
Inter-app audio (Consistent request from ISVs, a la VSTs, Audio Units, Rack Effects) WebAudio/web-audio-api#358 (5 comments by @jussi-kalliokoski, @mdjp)
-
Should Convolver normalisation be based on integrated energy? WebAudio/web-audio-api#481 (5 comments by @chrispike-bbc, @rtoy)
-
Difficult to address specific channel in ChannelMergerNode WebAudio/web-audio-api#304 (5 comments by @cwilso, @hoch, @joeberkovitz, @padenot)
-
AudioWorkerNode should still work if not connected to destination WebAudio/web-audio-api#476 (5 comments by @cwilso, @hughrawlinson, @rtoy)
-
Exposing a playbackPosition property on AudioBufferSourceNode. WebAudio/web-audio-api#2397 (5 comments by @cwilso, @karlt, @sebpiq)
-
start(), stop() and AudioParam methods should throw for NaN and Infinity WebAudio/web-audio-api#354 (4 comments by @bjornm, @cwilso, @rtoy)
-
AudioNode.disconnect() needs to be able to disconnect only one connection WebAudio/web-audio-api#6 (4 comments by @cwilso, @hoch, @padenot)
-
AudioFrequencyWorkerNode for working in the Frequency Domain WebAudio/web-audio-api#468 (3 comments by @jakubfiala, @notthetup)
-
(AudioBufferSourceNodePlaybackRate): AudioBufferSourceNode.playbackRate not strictly defined WebAudio/web-audio-api#95 (3 comments by @jernoble, @notthetup, @padenot)
-
(WaveTableNormalization): WaveTable normalization in createWaveTable not clearly defined WebAudio/web-audio-api#91 (2 comments by @rtoy)
-
Access to a different output device: AudioContext.setSinkId() WebAudio/web-audio-api#2400 (2 comments by @bill-hofmann, @hoch)
-
Allow arraybuffers to be made immutable and shared between main and audioworkernode threads WebAudio/web-audio-api#474 (2 comments by @charlieschwabacher, @padenot)
-
"Duration" undefined in case of looping AudioBufferSourceNode WebAudio/web-audio-api#421 (1 comment by @mark-buer)
-
-
3 pull requests opened.
-
Address issue 477, making the max array size 2048, not 4096. WebAudio/web-audio-api#485, by @rtoy.
-
Clarify real array usage in createPeriodicWave WebAudio/web-audio-api#483, by @chrislo.
-
#6 Support selective disconnection WebAudio/web-audio-api#479, by @hoch.
-
-
2 pull requests merged.
-
Address issue 477, making the max array size 2048, not 4096. WebAudio/web-audio-api#485.
-
Fix issue #375: Update spec to say 32K FFTs are allowed for AnalyserNode WebAudio/web-audio-api#463.
-
-
1 pull request closed.
-
Fix issue 471: Default panner is equal-power. WebAudio/web-audio-api#472.
-
-
4 pull requests received 22 new comments.
-
#6 Support selective disconnection WebAudio/web-audio-api#479 (19 comments by @adelespinasse, @cwilso, @hoch, @rtoy)
-
Address issue 477, making the max array size 2048, not 4096. WebAudio/web-audio-api#485 (1 comment by @cwilso)
-
Fix issue #375: Update spec to say 32K FFTs are allowed for AnalyserNode WebAudio/web-audio-api#463 (1 comment by @padenot)
-
GitHub
WebAudio/web-audio-api
-
7 issues opened.
-
PannerNode specification inconsistent WebAudio/web-audio-api#471, by @LJ1102.
-
Define FFT for AnalyzerNode WebAudio/web-audio-api#470, by @rtoy.
-
Audio nodes should expose their intrinsic latency. WebAudio/web-audio-api#469, by @cristiano-belloni.
-
AudioFrequencyWorkerNode for working in the Frequency Domain WebAudio/web-audio-api#468, by @hughrawlinson.
-
Clamp the gain contributed by the distanceModel WebAudio/web-audio-api#466, by @padenot.
-
Make AudioParam value attribute be a double instead of float WebAudio/web-audio-api#465, by @rtoy.
-
InvalidAccessError for WaveShaperNode.curve? WebAudio/web-audio-api#464, by @rtoy.
-
-
17 issues received 81 new comments.
-
AudioFrequencyWorkerNode for working in the Frequency Domain WebAudio/web-audio-api#468 (28 comments by @adelespinasse, @chrislo, @cristiano-belloni, @cwilso, @hoch, @hughrawlinson, @jakubfiala, @jesseallison, @nevosegal, @notthetup, @rtoy, @sebpiq, @svgeesus)
-
Audio nodes should expose their intrinsic latency. WebAudio/web-audio-api#469 (12 comments by @adelespinasse, @cristiano-belloni, @cwilso, @hoch, @rtoy)
-
Channel count of scheduled source nodes is unspecified when not playing? WebAudio/web-audio-api#462 (5 comments by @cwilso, @karlt, @rtoy)
-
Difficult to address specific channel in ChannelMergerNode WebAudio/web-audio-api#304 (4 comments by @cwilso, @hoch)
-
More clarifications for BiquadFilterNode needed. WebAudio/web-audio-api#419 (4 comments by @rtoy, @svgeesus)
-
(AudioBufferSourceNodePlaybackRate): AudioBufferSourceNode.playbackRate not strictly defined WebAudio/web-audio-api#95 (3 comments by @cwilso, @jernoble, @notthetup)
-
AudioBufferSourceNode.buffer should only be set once WebAudio/web-audio-api#288 (3 comments by @joeberkovitz, @padenot, @rtoy)
-
Sample format: what do +/-Infinity and NaN mean? WebAudio/web-audio-api#110 (2 comments by @cwilso, @rtoy)
-
Make AudioParam value attribute be a double instead of float WebAudio/web-audio-api#465 (2 comments by @padenot, @rtoy)
-
currentTime in AudioContext is not progressing while suspended anymore WebAudio/web-audio-api#460 (1 comment by @maximg)
-
Exposing a playbackPosition property on AudioBufferSourceNode. WebAudio/web-audio-api#2397 (1 comment by @sebpiq)
-
suspend/resume/close should use rejected promise for offline contexts WebAudio/web-audio-api#441 (1 comment by @padenot)
-
-
3 pull requests opened.
-
Fix issue 471: Default panner is equal-power. WebAudio/web-audio-api#472, by @rtoy.
-
Clamp the gain of the `distanceModel` in [0; 1] WebAudio/web-audio-api#467, by @padenot.
-
Fix issue #375: Update spec to say 32K FFTs are allowed for AnalyserNode WebAudio/web-audio-api#463, by @rtoy.
-
WebAudio/web-midi-api
-
2 issues opened.
-
Should sysex flag be on access to port somehow, rather than system-wide? WebAudio/web-midi-api#114, by @cwilso.
-
MIDI keyboard's problem WebAudio/web-midi-api#113, by @mattiasalvi.
-
-
1 issue closed.
-
MIDI keyboard's problem WebAudio/web-midi-api#113.
-
-
3 issues received 14 new comments.
-
Should sysex flag be on access to port somehow, rather than system-wide? WebAudio/web-midi-api#114 (12 comments by @agoode, @bome, @cwilso, @jyasskin, @mounirlamouri, @toyoshim)
-
-
1 pull request opened.
-
Normalize markup in section headings WebAudio/web-midi-api#112, by @jensl.
-
-
1 pull request merged.
-
Normalize markup in section headings WebAudio/web-midi-api#112.
-